Difference between revisions of "TUFLOW Message 2022"

From Tuflow
Jump to: navigation, search
(Created page with '{{TUFLOW_Message |tuflow_message=???? |message_desc=Can only use NEAREST TO LINE oblique boundary alignment for 2D BC if Oblique Boundary Method == ON. |suggestions=???? |discuss...')
 
 
(One intermediate revision by the same user not shown)
Line 1: Line 1:
 
{{TUFLOW_Message
 
{{TUFLOW_Message
|tuflow_message=????
+
|tuflow_message=ERROR 2022 - Can only use nearest to line oblique boundary alignment for 2D BC if "Oblique Boundary Method == ON
|message_desc=Can only use NEAREST TO LINE oblique boundary alignment for 2D BC if Oblique Boundary Method == ON.
+
|alt_msg=NA
|suggestions=????
+
|type=[[ERROR]]
 +
|message_desc=Can only use <font color="green"><tt>Oblique Boundary Alignment == NEAREST TO LINE </tt></font> for 2D BC if <font color="green"><tt>Oblique Boundary Method == ON</tt></font>.<br>
 +
As of Build 2006-06-AA, this command is considered redundant (other than for backward compatibility), as the Method C or D (Boundary Cell Selection and Line Cell Selection) ensures that the same cells are selected along both HX lines and Z lines.
 +
|suggestions=If using a build of TUFLOW prior to 2006-06-AA and using the <font color="green"><tt>Oblique Boundary Alignment == NEAREST TO LINE </tt></font> command, ensure that the <font color="green"><tt>Oblique Boundary Method == ON</tt></font> command is also used.
 +
 
 
|discussion_page=* [[Talk:TUFLOW Message 2022|Discuss Message 2022]]
 
|discussion_page=* [[Talk:TUFLOW Message 2022|Discuss Message 2022]]
 
|link3=''
 
|link3=''
 
|link4=''
 
|link4=''
 
|prelink=[[TUFLOW_Message_2021|Message 2021]]
 
|prelink=[[TUFLOW_Message_2021|Message 2021]]
 +
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
 
|nextlink=[[TUFLOW_Message_2023|Message 2023]]
 
|nextlink=[[TUFLOW_Message_2023|Message 2023]]
 
}}
 
}}

Latest revision as of 16:21, 6 February 2011

TUFLOW Message
ERROR 2022 - Can only use nearest to line oblique boundary alignment for 2D BC if "Oblique Boundary Method == ON

Alternate Message
NA

Message Type
ERROR

Description
Can only use Oblique Boundary Alignment == NEAREST TO LINE for 2D BC if Oblique Boundary Method == ON.
As of Build 2006-06-AA, this command is considered redundant (other than for backward compatibility), as the Method C or D (Boundary Cell Selection and Line Cell Selection) ensures that the same cells are selected along both HX lines and Z lines.

Suggestions
If using a build of TUFLOW prior to 2006-06-AA and using the Oblique Boundary Alignment == NEAREST TO LINE command, ensure that the Oblique Boundary Method == ON command is also used.

Links

Previous Up Next
Go-prev.png Message 2021 Go-up.png 2xxx Messages Message 2023 Go-next.png