TUFLOW Message 2048

From Tuflow
Revision as of 13:48, 11 February 2011 by Par (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

TUFLOW Message
ERROR 2048 - Boundary object does not select any 2D cells.

Alternate Message
NA

Message Type
ERROR

Description
Boundary object does not select any 2D cells. If using Line Cell Selection == Method C or Line Cell Selection == MethodD (the default in Builds 2006-06-XX onwards), the line must intersect the cross-hairs of a 2D cell. The cross-hair approach means that cells are selected only if a line intersects imaginary “cross-hairs” that extend from the cell’s mid-sides to mid-sides. This means that if a boundary or link line starts inside a cell, and does not intersect with the cross-hairs, that cell will not be selected.

Click on image below for larger view.

caption

TUFLOW "Cross-hair" method of cell selection.

Suggestions
Ensure boundary line object selects a 2D cell.

Links

Previous Up Next
Go-prev.png Message 2047 Go-up.png 2xxx Messages Message 2049 Go-next.png