TUFLOW Message 2078

From Tuflow
Revision as of 19:28, 14 February 2011 by Par (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

TUFLOW Message
CHECK 2078 - End of 3D HX breakline is dangling.

Alternate Message
CHECK 2078 - End of 3D TIN breakline is dangling.
CHECK 2078 - End of 3D line is dangling.

Message Type

End of 3D breakline is dangling. HX breakline does not have an elevation point at the end of the line, nearest point to the end of the line is used.

Check elevation at start of HX breakline, if none specified closest elevation point is used.


Previous Up Next
Go-prev.png Message 2077 Go-up.png 2xxx Messages Message 2079 Go-next.png