Difference between revisions of "TUFLOW Message 3027"

From Tuflow
Jump to: navigation, search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 3027: Roughness height specified but nLim less than 0. <br> |alt_msg=None |type=ERROR |message_desc=The limiting Manning’s n va...")
 
 
Line 6: Line 6:
 
|type=[[ERROR]]  
 
|type=[[ERROR]]  
 
|message_desc=The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.
 
|message_desc=The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.
|suggestions=A limiting Manning’s n value based on the n value that would normally be applied is also specified to transition to conventional n values at greater depths.
+
|suggestions=A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.
  
 
|discussion_page=* [[Talk:TUFLOW Message 3027|Discuss Message 3027]]
 
|discussion_page=* [[Talk:TUFLOW Message 3027|Discuss Message 3027]]

Latest revision as of 09:37, 20 April 2018

TUFLOW Message
ERROR 3027: Roughness height specified but nLim less than 0.

Alternate Message
None

Message Type
ERROR

Description
The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.

Suggestions
A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.

Links

Previous Up Next
Go-prev.png Message 3026 Go-up.png 3xxx Messages Message 3028 Go-next.png