TUFLOW Message 3027

From Tuflow
Revision as of 09:37, 20 April 2018 by Teegan.Burke (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

TUFLOW Message
ERROR 3027: Roughness height specified but nLim less than 0.

Alternate Message

Message Type

The limiting Manning’s n value, required for specifying bed resistance with the theoretically derived log law for shallow flows, must be greater than or equal to 0.0.

A limiting Manning’s n value (based on the n value that would normally be applied) is specified to transition to conventional n values at greater depths.


Previous Up Next
Go-prev.png Message 3026 Go-up.png 3xxx Messages Message 3028 Go-next.png