TUFLOW Message 3037

From Tuflow
Revision as of 10:21, 20 April 2018 by Teegan.Burke (Talk | contribs)

(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

TUFLOW Message
ERROR 3037: Cell area factors must be >= 0.0001.

Alternate Message

Message Type

The value of specified Storage Reduction Factor must be greater than 0.0001 (0.01%).

The Storage Reduction Factor (SRF) can be used to reduce the storage of 2D cells (for example to model hypothetical filling, or reduced storage from buildings). It is a reduction factor, so if a cell has a SRF value of 0.1, then its storage (surface area) is reduced by 10%.


Previous Up Next
Go-prev.png Message 3036 Go-up.png 3xxx Messages Message 3038 Go-next.png