TUFLOW Message 3039

From Tuflow
Jump to: navigation, search

TUFLOW Message
ERROR 3039: Form loss factors must be >= 0.

Alternate Message
None

Message Type
ERROR

Description
The value of specified Form Loss Coefficient must be greater than 0.0.

Suggestions
The Form Loss Coefficient (FLC) can be used to apply an additional energy loss at the 2D cell side (in the same manner as for 2D flow constrictions).

Links

Previous Up Next
Go-prev.png Message 3038 Go-up.png 3xxx Messages Message 3040 Go-next.png