View source for Tutorial M09 Results QGIS

=Introduction=
QGIS is used to load and view a range of event magnitudes and durations with the TUFLOW Viewer. For viewing of the 2D map results, see <u>[[Tutorial_M01_Results_QGIS | Module 1]]</u>.<br>
<br>

= TUFLOW Project Re-Configuration =
<ol>
<li>Set the QGIS workspace projection to EPSG:32760, see <u>[[Tutorial_Site_Familiarisation_QGIS#Set_the_Projection | Set the Projection]]</u>.
<li>Save the QGIS workspace by selecting Project > Save As.<br>
</ol>
<br>

=Method=
Inspect the results for all events:
<ol>
<li>Open the TUFLOW Viewer.
<li>Load the results using the TCF. From File > Load Results, navigate to the '''Module_09\TUFLOW\runs''' folder and select the following file:
:*'''M09_5m_~e1~_~e2~_001.tcf''' 
<li>When prompted, click 'Select All' and 'Ok'. The TUFLOW Viewer opens all six simulation runs using event management:<br>
<br>
{{Video|name=Animation_M09_Results_01b.mp4|width=1224}}<br>
<br>
<li>Inspect the extent, water level and the flow plot output for each event:<br>
<br>
{{Video|name=Animation_M09_Results_02b.mp4|width=1224}}<br>
<br>
</ol><br>

=Conclusion=
:*The results of all event magnitudes and durations were inspected using the TUFLOW Viewer.
:*For further functionality, see <u>[[TUFLOW_Viewer | TUFLOW Viewer]]</u>.<br>
<br>

{{Tips Navigation
|uplink=[[Tutorial_M09#Results| Back to Module 9 Main Page]]
}}