View source for TUFLOW Message 2140

{{TUFLOW_Message
|tuflow_message=ERROR 2140 - Reading following line in control file.
|alt_msg=NA
|type=[[ERROR]]
|message_desc=An error occurred reading the following line in the control file.
|suggestions=Check the line is a valid TUFLOW command for the version of TUFLOW that you are running. Common mistake are:<br>
* Omitting the double equals (<font color="blue"><tt>Set IWL </tt></font> <font color="red"><tt>=</tt></font><tt> 0.6</tt> not <font color="blue"><tt>Set IWL </tt></font> <font color="red"><tt>==</tt></font><tt> 0.6</tt>)
* Using the <font color="blue"><tt>Read GIS </tt></font> syntax for versions of TUFLOW prior to 2010 (use <font color="blue"><tt>Read MI </tt></font> instead).
* Using the <font color="blue"><tt>Read RowCol </tt></font> syntax for versions of TUFLOW prior to 2010 (use <font color="blue"><tt>Read MID </tt></font> instead).
* Putting a command in the wrong file, e.g. putting a geometry (.tgc) command in the boundary file (.tbc)


|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]

}}