View source for Tutorial M06 002 Results QGIS

=Introduction=
QGIS is used to view the cumulative rainfall, rainfall rate and material rainfall losses with the TUFLOW Viewer. For viewing of the 2D map results, see <u>[[Tutorial_M01_Results_QGIS | Module 1]]</u>.<br>
<br>

=Method=
Inspect cumulative rainfall, rainfall rate and loss outputs:
<ol>
<li>Open the TUFLOW Viewer.
<li>Select File > Load Results. Navigate to the '''M06_5m_002.tcf''' in the  '''Module_06\TUFLOW\runs''' folder and open it.
<li>One additional output type appears in the Result Type panel:
:*Cum. Mat. Loss: the total rainfall losses applied as initial and continuing losses specified in the materials file. 
<li>Use the Plot Time Series tool to see the cumulative material loss time series. Notice the variation due to the assigned materials ID:<br>
<br>
{{Video|name=Animation_M06_Results_002_01b.mp4|width=1262}}<br>
<br>
<li>Use the Plot Time Series tool to see the time series of the cumulative rainfall, rainfall rate and losses at a point. Notice the results vary spatially due to the 2d_rf polygons and 2d_mat regions: <br>
<br>
{{Video|name=Animation_M06_Results_002_02b.mp4|width=1262}}<br>
<br><br>
</ol>

=Conclusion=
:*The cumulative rainfall, rainfall rate and rainfall material losses derived from rainfall polygons were inspected with the TUFLOW Viewer.
:*For further functionality, see <u>[[TUFLOW_Viewer | TUFLOW Viewer]]</u>.<br>
<br>

{{Tips Navigation
|uplink=[[Tutorial_M06#Results_2| Back to Module 6 Main Page]]
}}