View source for ARR DATAHUB CANNOT BE ACCESSED

=Steps=
<ol>
<li> Run 'Extract ARR2016 for TUFLOW' tool in QGIS until error - ''This will let the tool download the data from BOM as well as perform the pre-calculations such as extract the catchment area and centroid from the input catchments''
<li> Open 'log.txt' located in the tool output folder and extract the longitudinal and latitude values<br>[[File:log_text_coords.PNG | 350px]]
<li> Using an internet browser, navigate to the [http://data.arr-software.org/ ARR datahub]
<li> Input the coordinates of your catchment
<li> Tick on the 'Select All' box<br>[[File:ARR_datahub_input.PNG | 550px]]
<li> Click '''Submit'''
<li> Navigate to the bottom of the page and click '''Download TXT'''<br>[[File:ARR_datahub_downloadtxt.PNG | 200px]]
<li> Create a new .txt file called 'ARR_Web_Data_<catchment name>.txt' and save it in the '''data''' folder alongside the existing file 'BOM_raw_web_<catchment name>.html - ''The catchment name should be consistent with the name used in the QGIS tool. It will be the same as the BOM raw output and also be listed in the log.txt after name=''<br>[[File:ARR_Web_data.PNG | 400px]]
<li> Copy the text from the '''Download TXT'' to the newly created 'ARR_web_data' text file
<li>