View source for TUFLOW Message 0051

{{TUFLOW_Message
|tuflow_message=ERROR 0051 - Invalid option specified on TUFLOW command line.
|alt_msg=NA
|type=[[ERROR]]
|message_desc=A run-time option could not be recognised.  Examples of options are -b for batching simulations; -c to copy a model; and -t to test the input only.  For a complete list of options see Table 5.2 in the 2010-10 TUFLOW Manual.
|suggestions=Check the command line being used to simulate TUFLOW and identify/correct the invalid option.
|discussion_page=* [[Talk:TUFLOW Message 0051|Discuss Message 0051]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_0041|Message 0041]]
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
|nextlink=[[TUFLOW_Message_0052|Message 0052]]
}}