View source for TUFLOW Viewer

<span style="color:#FF0000"><font size=4><b>THIS PAGE IS CURRENTLY UNDER CONSTRUCTION</b></font></span><br><br>

=Loading Results=
'''Option 1'''
: '''File >> Load Results'''<br>
'''Option 2'''
: Right Click in '''Open Results >> Load Results'''<Br>
<br>
There are 3 options for loading in results:
<ol>
<li> '''Load Results''' --> This is done via a TCF or FVC file and will load in all results (Map Outputs and Time Series)
<li> '''Load Results - Map Outputs'''  --> Select map output mesh results file (*.xmdf, *.dat, *.2dm, *.xmdf.sup, *.dat.sup)
<li> '''Load Results - Time Series'''  --> Select time series output results (*.tpc)
</ol>
<br>

[[File:LoadingResultsTCF.gif]]<br>
<br>

=Changing Result Type=
As simple as selecting a different result type in '''Result Type''' panel. You can only display one '''Scalar''' results and one '''Vector''' result at any given time.
<br><br>
[[File:ChangingResultType.gif]]<br>
<br>

==Showing Maximum==
'''Option 1'''
: Click the '''double up arrow''' next to the result type<Br>
'''Option 2'''
: '''Right click''' the result type >> Check on '''Maximum'''<Br>
<br>
[[File:ToggleMax.gif]]<Br>
<br>

==Showing Vectors==
Select one of the '''Vector''' result types in the '''Result Types''' panel<Br>
<br><br>
[[File:ToggleVectors.gif]]<Br>
<br>

=Styling Layer=
'''Option 1'''
: '''Right Click''' mesh layer in '''Layers Panel''' >> '''Properties... >>''' Navigate to the '''Contour Tab''' at the top '''>>''' Select Colour Ramp in drop down box '''>>''' Click '''Load''' >> Click '''OK'''<br>
'''Option 2'''
: '''Right Click''' result type in '''Result Type Panel''' >> '''Properties... >>''' Navigate to the '''Contour Tab''' at the top '''>>''' Select Colour Ramp in drop down box '''>>''' Click '''Load''' >> Click '''OK'''<br>
<br>
<br>
[[File:ChangeStyles.gif]]<br>
<br>

=Saving Default Style=
Saving a default style for a result type will mean that every time a result type of that name e.g 'Depth' is loaded, TUFLOW Viewer will automatically apply that style.<br>
<br>
There are 2 options:
<ol>
<li> Save Colour Ramp --> This will save the particular colour ramp as default. This means the actual min / max values will be adjusted based on the results. This is useful for results such as '''Bed Elevation''' or '''Water Level''' where the ranges are usually different depending on the model's location
<li> Save Colour Map --> This will save the exact values and associated colours used in the styling. This might be useful for results such as '''Depth''' or '''Velocity''' where a template can be applicable across different models
</ol>
<br>
: '''Right Click''' the result type '''>> Save Style As Default >> Colour Ramp'''<br>
<br>
[[File:SavingDefaultStyles.gif]]<br>
<br>

=Plotting From Map Outputs=

=Plotting Flow=

=Plotting From Time Series Outputs=

=Using a Secondary Axis=

=Changing Plot Properties=