View source for Tute M01 Active Areas SAGA

<ol>
== Introduction ==
This page details the method for using SAGA to set an active model area.

== Method ==

<li>Load the '''2d_code_empty_R.shp''' template file from the '''TUFLOW\model\saga\empty''' folder.</li>

== Conclusion ==
SAGA has been used to create a 2d_code layer which sets the code value for cells inside the boundary polygon to active (code = 1).  Please return to the tutorial model module 1 page [[Module1_test#Define_Prelinary_Active_and_Inactive_Areas_of_the_2D_Domain|here]].
</ol>