View source for TUFLOW Message 0030

{{TUFLOW_Message
|tuflow_message=ERROR 0030 - Cannot use "<font color="blue"><tt>BC Event Source</tt></font>" and "<font color="blue"><tt>BC Event Text</tt></font>" together.
|alt_msg=NA
|type=[[ERROR]]
|message_desc=These two commands cannot be used together.  Event text definitions can only be defined using one of these commands.  <font color="blue"><tt>BC Event Source  </tt></font><font color="red"><tt>== </tt></font> became available with the 2010-10 release and allows multiple event texts to be specified for assigning different event names to different boundaries, and is much more powerful than <font color="blue"><tt>BC Event Text </tt></font><font color="red"><tt>== </tt></font> which only allows one event text at any one time within the model.  Also see <u>[[TUFLOW Message 0031|Message 0031]]</u>.

This message occurs when <font color="blue"><tt>BC Event Source </tt></font> occurs after a <font color="blue"><tt>BC Event Text</tt></font>.  [[TUFLOW Message 0034|Message 0034]] occurs when <font color="blue"><tt>BC Event Text </tt></font> occurs after a <font color="blue"><tt>BC Event Source</tt></font>.
|suggestions=Rework the commands so that only one of the above commands exists.  Note, there is no limit to the number of times either of these commands is specified in a model, they just can't both exist in the same model.
<br>
|prelink=[[TUFLOW_Message_0029|Message 0029]]
|uplink=[[0xxx_TUFLOW_Messages|0xxx Messages]]
|nextlink=[[TUFLOW_Message_0031|Message 0031]]
}}