View source for TUFLOW Message 2377

{{TUFLOW_Message
|tuflow_message=ERROR 2377 - Apply Wind Stresses command is redundant as of Build 2009-05-AL.  Please refer to manual.
|alt_msg=NA
|type=[[ERROR]]
|message_desc=This command was made redundant as of Build 2009-05-AL and was replaced by the ability to apply wind stresses over time using “WT” 2D boundary conditions.
|suggestions=Use "WT" boundaries in a 2d_bc layer.
|discussion_page=* [[Talk:TUFLOW Message 2377|Discuss Message 2377]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_2376|Message 2376]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2381|Message 2381]]
}}