View source for Tutorial M08 002 Results QGIS

=Introduction=
QGIS is used to load and view the 5m EXG and 5m DEV scenarios with the TUFLOW Viewer. For viewing of the 2D map results, see <u>[[Tutorial_M01_Results_QGIS | Module 1]]</u>.<br>
<br>

=Method=
Inspect the results for all scenarios:
<ol>
<li>Open the TUFLOW Viewer.
<li>Load the 5m results for both EXG and DEV scenarios using the TLF, this option loads both types of results, Map Outputs and Time Series. From File > Load Results, navigate to the '''Module_08\TUFLOW\runs\log''' folder and select the '''M08_5m_EXG_002.tlf''' and '''M08_5m_DEV_002.tlf''' files. <br>
<li>Inspect the water level differences using the cross section tool plotting the bed elevation and water level:<br>
<br>
[[File:Animation M08 002 Results 02.gif]]<br>
</ol>
<br>

=Conclusion=
:*The results of the 5m EXG and 5m DEV scenarios were inspected using the TUFLOW Viewer.
:*For further functionality, see <u>[[TUFLOW_Viewer | TUFLOW Viewer]]</u>.<br>
:*The results for the different cell sizes can be investigated respectively.
<br>
{{Tips Navigation
|uplink=[[Tutorial_M08#Results_2| Back to Module 8 Main Page]]
}}