View source for WIBU Licence Update Request Uncoded

=Introduction=
This page contains instructions for creating a licence update request for an uncoded or non BMT-WBM Wibu licence.  Unless instructed by TUFLOW staff, the instructions on the following page should be followed instead [[WIBU_Licence_Update_Request | WIBU Licence Update Request]].<br>
=Method=
<ol>
<li>With the dongle inserted into your computer.  Open the Code Meter Control Centre from the taskbar by double clicking on the following icon [[File:CM CM Stick Green.jpg|20px]].  This can also be opened from the Start Menu.  Once opened the Control Centre should look like the below:</li>
<li> Click on the '''Licence Update''' button.</li>
[[File:CodeMeter Update01.jpg|600px]]
<li>At the welcome to the CmFAS Assistant screen, bit next to proceed.</li>
[[File:CodeMeter Update02.jpg|600px]]
<li>When prompted to chose the desired action, select '''Create Licence Request''' and hit next.</li>
[[File:CodeMeter Update03.jpg|600px]]
<li>As the dongle is a new or uncoded dongle you will need to choose '''Add Licence of New Producer''' and select next.</li>
[[File:CodeMeter Update08.jpg|600px]]
<li>When prompted to "Enter the Firm Code", enter '''101139'''.<br>
</li>
[[File:CodeMeter Update09.jpg|600px]]
<li>You will be asked to set the output file name and location.  When the licence update is processed, this will create a file which you will need to email, so please '''save in a location that you will remember!'''<br>
Once you have set an output filename, select '''Commit''' to create the licence request.</li>
[[File:CodeMeter Update06.jpg|600px]]
<li>After committing, the following screen will be displayed to confirm the licence request has been created.  Select '''Finish''' to close this screen.</li>
[[File:CodeMeter Update07.jpg|600px]]
<li>The licence update request can now be emailed to TUFLOW.  Please email the created .WibuCmRaC file through to <u>[mailto:sales@tuflow.com sales@tuflow.com]</u>. This file will be saved in the location set in step 7.</li>
</ol>
=Troubleshooting=
If the dongle has been previously used for TUFLOW simulations, then you do not need to add a new producer, and instead the following procedure can be used [[WIBU_Licence_Update_Request | WIBU Licence Update Request (normal)]].<br>
<br>
If you have any other issues with the licence update request, please email support@tuflow.com.  Please include screen images of any relevant error messages.