View source for EPA SWMM to TUFLOW

= Introduction =
This page outlines some utilities that may be used to convert EPA SWMM model files into a format which is compatible with TUFLOW. The utilities are available for download from the <u>[https://www.tuflow.com/Tuflow%20Utilities.aspx TUFLOW website]</u>.<br>If you have any suggestions to be included in these pages, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.<br>
<br>

= Model Conversion Utility (swmm_to_gis.exe) =
The swmm_to_gis.exe utility converts EPA SWMM files (.inp) to TUFLOW compatible GIS (mif and shp) format. The utility outputs include:
:*T

== Utility Execution ==
The utility requires GIS projection information to correctly translate the SWMM file (.inp) from  format to *mif or *.shp format. This is done by including either a projection or header file in the same folder directory as the SDF file. The utility will use the projection information from this file for the data conversion.
<ol>
<li> mif format input requirement:   Projection.mif or Header.mif
<li> shp format input requirement:   Projection.prj or Header.prj
</ol>
The following error message will be produced if projection information is not available:
 ERROR - A Header.prj or Projection.prj file does not exist in folder

=== Example Syntax ===

== Utility Output ==

=== Example Output ===