View source for TUFLOW Message 2618

{{TUFLOW_Message
|tuflow_message=WARNING 2618 - F1 rainfall factor of 0 set to 1. RF Name: <name>
|alt_msg=WARNING 2618 - F2 rainfall factor of 0 set to 1. RF Name: <name>
|type=[[WARNING]]
|message_desc=The F1 or F2 attribute in the GIS table for the rainfall point layer has not been set and is zero (or less).  These factors are applied as a multiplier on the rainfall boundary. 
|suggestions=It is recommended that if no rainfall factor is desired that these are set to 1 for clarity.  A value of 1 has overwritten the specified value of 0.
|discussion_page=* [[Talk:TUFLOW Message 2618|Discuss Message 2618]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_2617|Message 2617]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2619|Message 2619]]
}}