View source for 1D Bridges

<font size = 18>Page Under Construction</font>
<br>
<br>
<br>
=Introduction=

<br> 
*Link to 2D section – this section explains 1D bridges only.
*Advice on when you would model a 1D bridge versus a 2D bridge (read module 6).
*Examples on a XZ and HW bridge type – pictures & csv examples
*Information on the checks you can carry out
*Theory
**Loss types (piers Kp, blockage Kb)
**Guidance/reference on how to derive losses
**Make sure to include section on automation of pier losses?
*Method A & Method B for bridges – refer to Bill’s post on 1.56 value

<br>

[[File:Small_bridge.jpg|border|600px]] <br>




<br>
<br>
Any further questions please email TUFLOW support: [mailto:support@tuflow.com support@tuflow.com]