View source for TUFLOW Message 1002

← TUFLOW Message 1002

Jump to navigation Jump to search

You do not have permission to edit this page, for the following reason:

The action you have requested is limited to users in the group: Users.

You can view and copy the source of this page.

{{TUFLOW_Message
|tuflow_message=ERROR 1002 - No boundary condition found for node "a".
|alt_msg=NA
|type=[[ERROR]]
|message_desc=No boundary condition found for node "a".
|suggestions=Check if the "Name" attribute is specified in the 1d_bc GIS layer and if there is corresponding data in the boundary database.


|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
}}

Template used on this page:

Template:TUFLOW Message (view source) (protected)

Return to TUFLOW Message 1002.

Retrieved from "https://wiki.tuflow.com/TUFLOW_Message_1002"