View source for TUFLOW SWMM Tutorial M02 Results QGIS Development

==QGIS Result Viewing==
<ol>
<li>Open TUFLOW Viewer from the TUFLOW Plugin toolbar.<br>
<br>
[[File:tuflow_plugin_tuflow_viewer.png]]<br>
<br>
<li>Open the simulation results: Select File > Load Results. Navigate to the '''TUFLOW\runs''' folder and select '''TS02_5m_001.tcf'''.
<li>When asked 'Do you want to open result GIS Layer?', select 'Yes'. Five new files will load to the QGIS Layers Panel:
:*'''TS02_5m_001_swmm_ts_P''': 1D SWMM node junction and outlet water level results
:*'''TS02_5m_001_swmm_ts_L''': 1D SWMM conduit flow results
:*'''TS02_5m_001_PLOT_P''': 1D ESTRY and 2D plot output water level and velocity results ('''Note:''' There are no ESTRY results from this simulation)
:*'''TS02_5m_001_PLOT_L''': 1D ESTRY and 2D plot output flow results ('''Note:''' There are no ESTRY results from this simulation)
:*'''TS02_5m_001''': 2D TUFLOW results
<br>
{{Video|name=Animation_TS2_Results_01e.mp4|width=1350}}
<br>
</ol>

==Pipe Flow Results==

<ol>
<li>In the QGIS Layers Panel, right click '''TS02_5m_001_swmm_ts_L''' and select 'Zoom to Layer(s)'.
<li>In the TUFLOW Viewer Panel, click 'Play Through Timesteps' [[File: Play_through_timesteps_icon.png]]. Observe how the '''TS02_5m_001_swmm_ts_L''' results change color depending on the amount of flow within the 1D pipes. 
<br><br>
{{Video|name=Animation_TS2_Results_02e.mp4|width=1350}}
<br>
<li>In the QGIS Layers Panel, select (left click) '''TS02_5m_001_swmm_ts_L'''.
<li>Use the 'Select Features' tool to highlight a pipe within the network.
<li>Click on the 'Flow' dataset under 'Result Type' in the TUFLOW Viewer 'Time Series' list.
<li>Use the 'Select Features' tool to highlight other pipes within the network (hold Shift to select multiple). 
<br><br>
{{Video|name=Animation_TS2_Results_03e.mp4|width=1350}}
<br>
<li>In the QGIS Layers Panel, select (left click) '''TS02_5m_001_swmm_ts_P'''.
<li>Use the 'Select Features' tool to highlight a node junction within the network.
<li>Click on the 'Water Level' dataset under 'Result Type' in the TUFLOW Viewer 'Time Series' list.
<li>Use the 'Select Features' tool to highlight other node junctions within the network (hold Shift to select multiple). 
<br><br>
{{Video|name=Animation_TS2_Results_04e.mp4|width=1350}}
<br>
</ol>

==Pipe Long-section Results==
<ol>
<li>In the QGIS Layers Panel, select (left click) '''TS02_5m_001_swmm_ts_L'''. 
<li>Use the 'Select Features' tool to highlight two pipe segments. The long-section between the pipes will be plotted.
<li>Click on the 'Cross Section / Long Profile' tab. 
<li>Click on the 'Water level', 'Max Water Level' and 'Culverts and Pipes' datasets under 'Result Type' in the TUFLOW Viewer 'Time Series' list.
<li>Move the time slider to view how the water level in the pipe varies during the simulation. 
<br><br>
{{Video|name=Animation_TS2_Results_05e.mp4|width=1350}}
<br>
</ol>
<br>
{{Tips Navigation
|uplink=[[TUFLOW_SWMM_Tutorial_M02#Check_Files_and_Results_Output| Back to TUFLOW SWMM Tutorial 2]]
}}