FM Tute M02 QGIS Define Elevations - Revision history

Emilie Nielsen at 23:59, 22 September 2024

2024-09-22T23:59:48Z

← Older revision		Revision as of 09:59, 23 September 2024
Line 1:		Line 1:
	=Introduction=		=Introduction=

	This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to ~~this~~ [https://docs.tuflow.com/classic-hpc/manual/~~2023-03~~/~~TwoD-Domains-1.html#ztin-4 section] of the latest~~ TUFLOW ~~manual~~ for more information on this feature.		This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more information on this feature.

	=Method=		=Method=

Tuflowduncan at 15:41, 12 September 2024

2024-09-12T15:41:28Z

← Older revision		Revision as of 01:41, 13 September 2024
Line 1:		Line 1:
	=Introduction=		=Introduction=

	This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to ~~Section~~ 6.8.4 of the ~~2017~~ TUFLOW manual for more information on this feature.		This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to this [https://docs.tuflow.com/classic-hpc/manual/2023-03/TwoD-Domains-1.html#ztin-4 section] of the latest TUFLOW manual for more information on this feature.

	=Method=		=Method=

Tuflowduncan: /* Method */

2019-01-04T08:37:08Z

Method

← Older revision		Revision as of 18:37, 4 January 2019
Line 6:		Line 6:
	<ol>		<ol>
	<li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2D_Development</b> into the <b>TUFLOW\model\gis</b> folder. This folder contains the following two layers: <br>		<li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2D_Development</b> into the <b>TUFLOW\model\gis</b> folder. This folder contains the following two layers: <br>
	*<b>~~2d_ztin_M07_development_001_R~~.shp</b>, and		*<b>2d_ztin_FMT_M02_development_001_R.shp</b>, and
	*<b>2d_ztin_FMT_M02_development_001_P.shp</b>.		*<b>2d_ztin_FMT_M02_development_001_P.shp</b>.

	<li>Open the layer 2d_ztin_ ~~FMT_M02_development_001~~ within QGIS and observe the polygon and its attributes. This polygon defines the area within which we wish to alter the zpt elevations. Any points falling within the polygon are used for creating the TIN surface. The attributes of this polygon have been left blank (are set to 0) as the elevations will be defined in a separate layer.		<li>Open the layer '''2d_ztin_ FMT_M02_development_001_R''' within QGIS and observe the polygon and its attributes. This polygon defines the area within which we wish to alter the zpt elevations. Any points falling within the polygon are used for creating the TIN surface. The attributes of this polygon have been left blank (are set to 0) as the elevations will be defined in a separate layer.
	<li>Open the layer '2d_ztin_ FMT_M02_development_001_P within QGIS and observe the points and its attributes. These points all have elevations assigned to the ‘Z’ attribute and will be used when generating the TIN. Note that none of the points are snapped to the polygon within the 2d_ztin_ ~~FMT_M02_development_001~~ layer. The elevations of the polygon’s perimeter will therefore be based on the current zpt values (i.e. the zpt values assigned by any prior commands). Later on in this tutorial, we will specify the command used within the tgc to associate the two GIS layers with each other.<br>		<li>Open the layer '''2d_ztin_ FMT_M02_development_001_P''' within QGIS and observe the points and its attributes. These points all have elevations assigned to the ‘Z’ attribute and will be used when generating the TIN. Note that none of the points are snapped to the polygon within the '''2d_ztin_ FMT_M02_development_001_R''' layer. The elevations of the polygon’s perimeter will therefore be based on the current zpt values (i.e. the zpt values assigned by any prior commands). Later on in this tutorial, we will specify the command used within the tgc to associate the two GIS layers with each other.<br>

	[[File:M07 TIN QGIS.png\|800px]]		[[File:M07 TIN QGIS.png\|800px]]

Tuflowduncan: /* Conclusion */

2019-01-03T13:42:41Z

Conclusion

← Older revision		Revision as of 23:42, 3 January 2019
Line 18:		Line 18:
	=Conclusion=		=Conclusion=

	The two 2D_tin layers will together modify the zpt elevations in the area of the proposed development. The latter part of this module will demonstrate the command used to write a .tin file to allow for viewing and editing of the TIN directly in SMS. Checks will also be carried out to observe how the TIN has been generated. Please return to the main page of the [[Flood_Modeller_Tutorial_Module02\|Flood Modeller Module 2]].		The two 2D_tin layers will together modify the zpt elevations in the area of the proposed development. The latter part of this module will demonstrate the command used to write a .tin file to allow for viewing and editing of the TIN directly in SMS. Checks will also be carried out to observe how the TIN has been generated. Please return to the main page of the [[Flood_Modeller_Tutorial_Module02#Define Surface Roughness\|Flood Modeller Module 2 Tutorial]].

Tuflowduncan: /* Conclusion */

2019-01-03T13:35:33Z

Conclusion

← Older revision		Revision as of 23:35, 3 January 2019
Line 18:		Line 18:
	=Conclusion=		=Conclusion=

	The two 2D_tin layers will together modify the zpt elevations in the area of the proposed development. The latter part of this module will demonstrate the command used to write a .tin file to allow for viewing and editing of the TIN directly in SMS. Checks will also be carried out to observe how the TIN has been generated. Please return to the main page of the [[~~Tutorial_Module02~~\|Flood Modeller Module 2]].		The two 2D_tin layers will together modify the zpt elevations in the area of the proposed development. The latter part of this module will demonstrate the command used to write a .tin file to allow for viewing and editing of the TIN directly in SMS. Checks will also be carried out to observe how the TIN has been generated. Please return to the main page of the [[Flood_Modeller_Tutorial_Module02\|Flood Modeller Module 2]].

Tuflowduncan: /* Conclusion */

2019-01-03T13:34:35Z

Conclusion

← Older revision		Revision as of 23:34, 3 January 2019
Line 18:		Line 18:
	=Conclusion=		=Conclusion=

	The two 2D_tin layers will together modify the zpt elevations in the area of the proposed development. The latter part of this module will demonstrate the command used to write a .tin file to allow for viewing and editing of the TIN directly in SMS. Checks will also be carried out to observe how the TIN has been generated. Please return to the main page of the[[Tutorial_Module02\|Flood Modeller Module 2]].		The two 2D_tin layers will together modify the zpt elevations in the area of the proposed development. The latter part of this module will demonstrate the command used to write a .tin file to allow for viewing and editing of the TIN directly in SMS. Checks will also be carried out to observe how the TIN has been generated. Please return to the main page of the [[Tutorial_Module02\|Flood Modeller Module 2]].

Tuflowduncan: /* Method */

2019-01-03T13:32:37Z

Method

← Older revision		Revision as of 23:32, 3 January 2019
Line 7:		Line 7:
	<li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2D_Development</b> into the <b>TUFLOW\model\gis</b> folder. This folder contains the following two layers: <br>		<li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2D_Development</b> into the <b>TUFLOW\model\gis</b> folder. This folder contains the following two layers: <br>
	*<b>2d_ztin_M07_development_001_R.shp</b>, and		*<b>2d_ztin_M07_development_001_R.shp</b>, and
	*<b>2d_ztin_FMT_M02_development_001_P</b>~~.shp~~.		*<b>2d_ztin_FMT_M02_development_001_P.shp</b>.

	<li>Open the layer 2d_ztin_ FMT_M02_development_001 within QGIS and observe the polygon and its attributes. This polygon defines the area within which we wish to alter the zpt elevations. Any points falling within the polygon are used for creating the TIN surface. The attributes of this polygon have been left blank (are set to 0) as the elevations will be defined in a separate layer.		<li>Open the layer 2d_ztin_ FMT_M02_development_001 within QGIS and observe the polygon and its attributes. This polygon defines the area within which we wish to alter the zpt elevations. Any points falling within the polygon are used for creating the TIN surface. The attributes of this polygon have been left blank (are set to 0) as the elevations will be defined in a separate layer.

Tuflowduncan: /* Method */

2019-01-03T13:31:56Z

Method

← Older revision		Revision as of 23:31, 3 January 2019
Line 6:		Line 6:
	<ol>		<ol>
	<li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2D_Development</b> into the <b>TUFLOW\model\gis</b> folder. This folder contains the following two layers: <br>		<li>Copy the contents of the <b>FMT_Tutorial\Module_data\Module_02\2D_Development</b> into the <b>TUFLOW\model\gis</b> folder. This folder contains the following two layers: <br>
	*2d_ztin_M07_development_001_R.shp and		*<b>2d_ztin_M07_development_001_R.shp</b>, and
	*2d_ztin_FMT_M02_development_001_P.shp.		*<b>2d_ztin_FMT_M02_development_001_P</b>.shp.

	<li>Open the layer 2d_ztin_ FMT_M02_development_001 within QGIS and observe the polygon and its attributes. This polygon defines the area within which we wish to alter the zpt elevations. Any points falling within the polygon are used for creating the TIN surface. The attributes of this polygon have been left blank (are set to 0) as the elevations will be defined in a separate layer.		<li>Open the layer 2d_ztin_ FMT_M02_development_001 within QGIS and observe the polygon and its attributes. This polygon defines the area within which we wish to alter the zpt elevations. Any points falling within the polygon are used for creating the TIN surface. The attributes of this polygon have been left blank (are set to 0) as the elevations will be defined in a separate layer.
	<li>Open the layer '2d_ztin_ FMT_M02_development_001_P within QGIS and observe the points and its attributes. These points all have elevations assigned to the ‘Z’ attribute and will be used when generating the TIN. Note that none of the points are snapped to the polygon within the 2d_ztin_ FMT_M02_development_001 layer. The elevations of the polygon’s perimeter will therefore be based on the current zpt values (i.e. the zpt values assigned by any prior commands). Later on in this tutorial, we will specify the command used within the tgc to associate the two GIS layers with each other.<br>		<li>Open the layer '2d_ztin_ FMT_M02_development_001_P within QGIS and observe the points and its attributes. These points all have elevations assigned to the ‘Z’ attribute and will be used when generating the TIN. Note that none of the points are snapped to the polygon within the 2d_ztin_ FMT_M02_development_001 layer. The elevations of the polygon’s perimeter will therefore be based on the current zpt values (i.e. the zpt values assigned by any prior commands). Later on in this tutorial, we will specify the command used within the tgc to associate the two GIS layers with each other.<br>

	[[File:M07 TIN ~~ARC~~.png\|800px]]		[[File:M07 TIN QGIS.png\|800px]]

	<li> Save and close the layers.</li></ol>		<li> Save and close the layers.</li></ol>

Tuflowduncan: Created page with "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to Section 6.8.4 of..."

2019-01-03T13:29:04Z

Created page with "=Introduction= This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to Section 6.8.4 of..."

New page

=Introduction=

This page describes the method for using QGIS to create a 3D TIN, modifying the zpt elevations to represent the proposed development. Refer to Section 6.8.4 of the 2017 TUFLOW manual for more information on this feature.

=Method=
<ol>
<li>Copy the contents of the FMT_Tutorial\Module_data\Module_02\2D_Development into the TUFLOW\model\gis folder. This folder contains the following two layers: 
*2d_ztin_M07_development_001_R.shp and
*2d_ztin_FMT_M02_development_001_P.shp.

<li>Open the layer 2d_ztin_ FMT_M02_development_001 within QGIS and observe the polygon and its attributes. This polygon defines the area within which we wish to alter the zpt elevations. Any points falling within the polygon are used for creating the TIN surface. The attributes of this polygon have been left blank (are set to 0) as the elevations will be defined in a separate layer.
<li>Open the layer '2d_ztin_ FMT_M02_development_001_P within QGIS and observe the points and its attributes. These points all have elevations assigned to the ‘Z’ attribute and will be used when generating the TIN. Note that none of the points are snapped to the polygon within the 2d_ztin_ FMT_M02_development_001 layer. The elevations of the polygon’s perimeter will therefore be based on the current zpt values (i.e. the zpt values assigned by any prior commands). Later on in this tutorial, we will specify the command used within the tgc to associate the two GIS layers with each other. 

[[File:M07 TIN ARC.png|800px]]

<li> Save and close the layers.</li></ol>

=Conclusion=

The two 2D_tin layers will together modify the zpt elevations in the area of the proposed development. The latter part of this module will demonstrate the command used to write a .tin file to allow for viewing and editing of the TIN directly in SMS. Checks will also be carried out to observe how the TIN has been generated. Please return to the main page of the[[Tutorial_Module02|Flood Modeller Module 2]].