Flood Modeller-TUFLOW Linking - Revision history

Emilie Nielsen at 00:13, 18 July 2024

2024-07-18T00:13:14Z

← Older revision		Revision as of 10:13, 18 July 2024
Line 1:		Line 1:
	=Introduction=		=Introduction=
	TUFLOW can link with a range of one-dimensional modelling software, including the <u>[~~http~~://www.floodmodeller.com Flood Modeller]</u> hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>		TUFLOW can link with a range of one-dimensional modelling software, including the <u>[https://www.floodmodeller.com Flood Modeller]</u> hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>

	TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.		TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.
Line 13:		Line 13:

	==Linking Flood Modeller to TUFLOW==		==Linking Flood Modeller to TUFLOW==
	This <u>[[Running_linked_Flood_Modeller_-_TUFLOW_Models \| page]]</u> provides some information about how to link the Flood Modeller software to TUFLOW. Note that the method can vary depending on the version of Flood Modeller being used. Later versions of Flood Modeller allow the user to specify the folder which the TUFLOW engine files are kept within and to allow the user to vary this depending on the version required. For the approach recommended for the specific version being used, please refer to the <u>[~~http~~://help.floodmodeller.com/floodmodeller/ Flood Modeller User Manual]</u>.		This <u>[[Running_linked_Flood_Modeller_-_TUFLOW_Models \| page]]</u> provides some information about how to link the Flood Modeller software to TUFLOW. Note that the method can vary depending on the version of Flood Modeller being used. Later versions of Flood Modeller allow the user to specify the folder which the TUFLOW engine files are kept within and to allow the user to vary this depending on the version required. For the approach recommended for the specific version being used, please refer to the <u>[https://help.floodmodeller.com/floodmodeller/ Flood Modeller User Manual]</u>.

	==Benchmarking==		==Benchmarking==

Chris Huxley: /* Tutorials */

2023-01-23T01:19:24Z

Tutorials

← Older revision		Revision as of 11:19, 23 January 2023
Line 28:		Line 28:

	To gain a better understanding of the linking of Flood Modeller 1D domains to TUFLOW, a number of tutorials have been developed which are described <u>[[Flood_Modeller_Tutorial_Model\| here]]</u>. The first tutorial <u>[[Flood Modeller Tutorial Module01\| module]]</u> introduces the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model. From this tutorial you will learn how to link an existing Flood Modeller 1D model to a TUFLOW 2D domain.<br> <u>[[Flood Modeller Tutorial Module02\| Tutorial 2]]</u> provides instructions on how to connect a TUFLOW 1D model to Flood Modeller using a X1DQ link.		To gain a better understanding of the linking of Flood Modeller 1D domains to TUFLOW, a number of tutorials have been developed which are described <u>[[Flood_Modeller_Tutorial_Model\| here]]</u>. The first tutorial <u>[[Flood Modeller Tutorial Module01\| module]]</u> introduces the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model. From this tutorial you will learn how to link an existing Flood Modeller 1D model to a TUFLOW 2D domain.<br> <u>[[Flood Modeller Tutorial Module02\| Tutorial 2]]</u> provides instructions on how to connect a TUFLOW 1D model to Flood Modeller using a X1DQ link.
			<br>
			{{Tips Navigation
			\|uplink=[[Main_Page\| Back to Main Page]]
			}}

Tuflowduncan: /* Introduction */

2022-09-14T07:38:48Z

Introduction

← Older revision		Revision as of 17:38, 14 September 2022
Line 6:		Line 6:
	The second approach is to connect Flood Modeller to the TUFLOW 1D engine. This 1D-1D connection allows TUFLOW 1D representations of river channels or pipe networks to drain to the 1D Flood Modeller domain, or the Flood Modeller 1D domain to drain into a TUFLOW 1D representation of the downstream network. This allows a representation of integrated urban catchment modelling <br>		The second approach is to connect Flood Modeller to the TUFLOW 1D engine. This 1D-1D connection allows TUFLOW 1D representations of river channels or pipe networks to drain to the 1D Flood Modeller domain, or the Flood Modeller 1D domain to drain into a TUFLOW 1D representation of the downstream network. This allows a representation of integrated urban catchment modelling <br>

	Flood Modeller is compatible with TUFLOW Classic and TUFLOW HPC. Flood Modeller 4.5 is fully compatible with TUFLOW HPC utilising the GPU card. Flood Modeller ~~4.6~~ is required to use TUFLOW Quadtree, available in the 2020-01-AA release and later.		Flood Modeller is compatible with TUFLOW Classic and TUFLOW HPC. Flood Modeller 4.5 is fully compatible with TUFLOW HPC utilising the GPU card. Flood Modeller 5 or later is required to use TUFLOW Quadtree, available in the 2020-01-AA release and later.

	To assist the user get up to speed with Flood Modeller-TUFLOW modelling, a number of wiki pages have been developed to provide benchmarking, guidance and tutorials. These are identified in the following sections.		To assist the user get up to speed with Flood Modeller-TUFLOW modelling, a number of wiki pages have been developed to provide benchmarking, guidance and tutorials. These are identified in the following sections.

Tuflowduncan: /* How to Link Flood Modeller to TUFLOW 2D */

2020-07-01T14:47:05Z

How to Link Flood Modeller to TUFLOW 2D

← Older revision		Revision as of 00:47, 2 July 2020
Line 19:		Line 19:

	==How to Link Flood Modeller to TUFLOW 2D==		==How to Link Flood Modeller to TUFLOW 2D==
			This [[1D-2D Flood Modeller-TUFLOW\|page]] provides information about the linking of a 1D representation of an open channel within Flood Modeller to a 2D TUFLOW domain via linear coupling between the two software along the banks of the river. This linear coupling is conducted using HX links. Point coupling via SX lines is also described.
	[[1D-2D Flood Modeller-TUFLOW]]

	==How to link Flood Modeller to TUFLOW 1D==		==How to link Flood Modeller to TUFLOW 1D==

Tuflowduncan: /* How to Link Flood Modeller to TUFLOW 2D */

2020-07-01T11:43:22Z

How to Link Flood Modeller to TUFLOW 2D

← Older revision		Revision as of 21:43, 1 July 2020
Line 19:		Line 19:

	==How to Link Flood Modeller to TUFLOW 2D==		==How to Link Flood Modeller to TUFLOW 2D==
	[[1d-2D Flood Modeller-TUFLOW]]		[[1D-2D Flood Modeller-TUFLOW]]

	==How to link Flood Modeller to TUFLOW 1D==		==How to link Flood Modeller to TUFLOW 1D==

Tuflowduncan at 11:43, 1 July 2020

2020-07-01T11:43:03Z

← Older revision		Revision as of 21:43, 1 July 2020
Line 19:		Line 19:

	==How to Link Flood Modeller to TUFLOW 2D==		==How to Link Flood Modeller to TUFLOW 2D==
			[[1d-2D Flood Modeller-TUFLOW]]
	!!Coming Soon!!

	==How to link Flood Modeller to TUFLOW 1D==		==How to link Flood Modeller to TUFLOW 1D==

Tuflowduncan at 09:50, 29 May 2020

2020-05-29T09:50:41Z

← Older revision		Revision as of 19:50, 29 May 2020
Line 27:		Line 27:
	==Tutorials==		==Tutorials==

	To gain a better understanding of the linking of Flood Modeller 1D domains to TUFLOW, a number of tutorials have been developed which are described [[Flood_Modeller_Tutorial_Model\| here]]. The first tutorial <u>[[Flood Modeller Tutorial Module01\| module]]</u> introduces the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model. From this tutorial you will learn how to link an existing Flood Modeller 1D model to a TUFLOW 2D domain.<br> <u>[[Flood Modeller Tutorial Module02\| Tutorial 2]]</u> provides instructions on how to connect a TUFLOW 1D model to Flood Modeller using a X1DQ link.		To gain a better understanding of the linking of Flood Modeller 1D domains to TUFLOW, a number of tutorials have been developed which are described <u>[[Flood_Modeller_Tutorial_Model\| here]]</u>. The first tutorial <u>[[Flood Modeller Tutorial Module01\| module]]</u> introduces the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model. From this tutorial you will learn how to link an existing Flood Modeller 1D model to a TUFLOW 2D domain.<br> <u>[[Flood Modeller Tutorial Module02\| Tutorial 2]]</u> provides instructions on how to connect a TUFLOW 1D model to Flood Modeller using a X1DQ link.

Tuflowduncan at 08:32, 29 May 2020

2020-05-29T08:32:26Z

← Older revision		Revision as of 18:32, 29 May 2020
Line 1:		Line 1:
	=Introduction=		=Introduction=
	TUFLOW can link with a range of one-dimensional modelling software, including the [http://www.floodmodeller.com Flood Modeller] hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>		TUFLOW can link with a range of one-dimensional modelling software, including the <u>[http://www.floodmodeller.com Flood Modeller]</u> hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>

	TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.		TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.
Line 13:		Line 13:

	==Linking Flood Modeller to TUFLOW==		==Linking Flood Modeller to TUFLOW==
	This [[Running_linked_Flood_Modeller_-_TUFLOW_Models \| page]] provides some information about how to link the Flood Modeller software to TUFLOW. Note that the method can vary depending on the version of Flood Modeller being used. Later versions of Flood Modeller allow the user to specify the folder which the TUFLOW engine files are kept within and to allow the user to vary this depending on the version required. For the approach recommended for the specific version being used, please refer to the [http://help.floodmodeller.com/floodmodeller/ Flood Modeller User Manual].		This <u>[[Running_linked_Flood_Modeller_-_TUFLOW_Models \| page]]</u> provides some information about how to link the Flood Modeller software to TUFLOW. Note that the method can vary depending on the version of Flood Modeller being used. Later versions of Flood Modeller allow the user to specify the folder which the TUFLOW engine files are kept within and to allow the user to vary this depending on the version required. For the approach recommended for the specific version being used, please refer to the <u>[http://help.floodmodeller.com/floodmodeller/ Flood Modeller User Manual]</u>.

	==Benchmarking==		==Benchmarking==
	The Flood Modeller-TUFLOW benchmarking [[Flood_Modeller-TUFLOW_Benchmarking \| page ]] provides some information about testing of a number of linked Flood Modeller 1D-TUFLOW 2D models which have been run on different TUFLOW Solvers (TUFLOW Classic and HPC), utilising different hardware (Single CPU, Multiple CPU and GPU Cards) and different machine specifications.		The Flood Modeller-TUFLOW benchmarking <u>[[Flood_Modeller-TUFLOW_Benchmarking \| page ]]</u> provides some information about testing of a number of linked Flood Modeller 1D-TUFLOW 2D models which have been run on different TUFLOW Solvers (TUFLOW Classic and HPC), utilising different hardware (Single CPU, Multiple CPU and GPU Cards) and different machine specifications.

	==How to Link Flood Modeller to TUFLOW 2D==		==How to Link Flood Modeller to TUFLOW 2D==
Line 23:		Line 23:
	==How to link Flood Modeller to TUFLOW 1D==		==How to link Flood Modeller to TUFLOW 1D==

	Flood Modeller models can be connected to TUFLOW's 1D engine called Estry. This provides a powerful approach of modelling pipe networks in Estry, river channels in Flood Modeller (note that Estry can also model 1D river channels) and the floodplain and urban surface in TUFLOW, providing integrated urban catchment modelling functionality. This [[TUFLOW_1D_Flood_Modeller_Connectivity \| page ]] provides more information on the linking approaches to link Flood Modeller to estry.		Flood Modeller models can be connected to TUFLOW's 1D engine called Estry. This provides a powerful approach of modelling pipe networks in Estry, river channels in Flood Modeller (note that Estry can also model 1D river channels) and the floodplain and urban surface in TUFLOW, providing integrated urban catchment modelling functionality. This <u>[[TUFLOW_1D_Flood_Modeller_Connectivity \| page ]]</u> provides more information on the linking approaches to link Flood Modeller to estry.

	==Tutorials==		==Tutorials==

	To gain a better understanding of the linking of Flood Modeller 1D domains to TUFLOW, a number of tutorials have been developed which are described [[Flood_Modeller_Tutorial_Model\| here]]. The first tutorial [[Flood Modeller Tutorial Module01\| module]] introduces the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model. From this tutorial you will learn how to link an existing Flood Modeller 1D model to a TUFLOW 2D domain.<br> [[Flood Modeller Tutorial Module02\| Tutorial 2]] provides instructions on how to connect a TUFLOW 1D model to Flood Modeller using a X1DQ link.		To gain a better understanding of the linking of Flood Modeller 1D domains to TUFLOW, a number of tutorials have been developed which are described [[Flood_Modeller_Tutorial_Model\| here]]. The first tutorial <u>[[Flood Modeller Tutorial Module01\| module]]</u> introduces the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model. From this tutorial you will learn how to link an existing Flood Modeller 1D model to a TUFLOW 2D domain.<br> <u>[[Flood Modeller Tutorial Module02\| Tutorial 2]]</u> provides instructions on how to connect a TUFLOW 1D model to Flood Modeller using a X1DQ link.

Tuflowduncan: /* Introduction */

2020-05-28T12:56:33Z

Introduction

← Older revision		Revision as of 22:56, 28 May 2020
Line 1:		Line 1:
	=Introduction=		=Introduction=
	TUFLOW can link with a range of one-dimensional modelling software, including the [http://www.floodmodeller.com \| Flood Modeller] hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>		TUFLOW can link with a range of one-dimensional modelling software, including the [http://www.floodmodeller.com Flood Modeller] hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>

	TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.		TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.

Tuflowduncan: /* Introduction */

2020-05-28T12:56:04Z

Introduction

← Older revision		Revision as of 22:56, 28 May 2020
Line 1:		Line 1:
	=Introduction=		=Introduction=
	TUFLOW can link with a range of one-dimensional modelling software, including the [[www.floodmodeller.com \| Flood Modeller]] hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>		TUFLOW can link with a range of one-dimensional modelling software, including the [http://www.floodmodeller.com \| Flood Modeller] hydraulic modelling software which is produced by Jacobs. Flood Modeller is a software package which is primarily used in the UK for the modelling of river channels and their structures. <br>

	TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.		TUFLOW can be linked to Flood Modeller in a couple of ways. The first is to connect the Flood Modeller 1D representation of the open river channel to a TUFLOW 2D representation of the floodplain. This allows dynamic coupled 1D-2D modelling of the river and it's floodplain with bi-directional flow. TUFLOW 1D elements can be used on the 2D representation of the floodplain.