Flood Modeller Tutorial Module01 - Revision history

RussellGardner: /* Troubleshooting for HPC Simulation */

2026-03-30T13:34:11Z

Troubleshooting for HPC Simulation

← Older revision		Revision as of 23:34, 30 March 2026
Line 275:		Line 275:
	</pre>		</pre>

	~~Please~~ ensure that the four TUFLOW kernel files below have been transferred from your TUFLOW engine folder into your Flood Modeller "bin" folder.		If using the 2023-03-AA release or later up to, but not including, the 2026.0.0 release , please ensure that the four TUFLOW kernel files below have been transferred from your TUFLOW engine folder into your Flood Modeller "bin" folder.

	*hpcKernels_nSP.ptx		*hpcKernels_nSP.ptx
Line 281:		Line 281:
	*qpcKernels_nSP.ptx		*qpcKernels_nSP.ptx
	*qpcKernels_nDP.ptx		*qpcKernels_nDP.ptx
			If using the 2026.0.0 release or later, please ensure that the four TUFLOW fatbin container files listed below have been transferred from your TUFLOW engine folder into your Flood Modeller "bin" folder.

			* hpcKernels_nDP.fatbin
			* hpcKernels_nSP.fatbin
			* qpcKernels_nDP.fatbin
			* qpcKernels_nSP.fatbin

	=== Troubleshooting for GPU Simulation ===		=== Troubleshooting for GPU Simulation ===

RussellGardner at 10:16, 24 December 2025

2025-12-24T10:16:34Z

← Older revision		Revision as of 20:16, 24 December 2025
Line 297:		Line 297:

	{{Tips Navigation		{{Tips Navigation
	\|uplink=[[~~Flood_Modeller_Tutorial_Model_Provisional~~\| Back to Tutorial Introduction Main Page]]		\|uplink=[[Flood_Modeller_Tutorial_Model\| Back to Tutorial Introduction Main Page]]
	}}		}}

RussellGardner at 10:14, 24 December 2025

2025-12-24T10:14:42Z

Show changes

Pavlina Monhartova: /* TUFLOW HPC */

2025-10-23T07:01:02Z

TUFLOW HPC

← Older revision		Revision as of 17:01, 23 October 2025
Line 262:		Line 262:
	<br>		<br>
	If you experience an issue that is not detailed above please send an email to [mailto:support@tuflow.com support@tuflow.com]<br>		If you experience an issue that is not detailed above please send an email to [mailto:support@tuflow.com support@tuflow.com]<br>

			=Conclusion=
			We introduced the user to the linking of a TUFLOW 2D domain to a 1D Flood Modeller model.<br>
			For further training opportunities see <u>[https://tuflow.com/training/training-course-catalogue/ TUFLOW Training Catalogue]</u> and/or contact <u>[mailto:training@tuflow.com training@tuflow.com]</u>. <br>

			<br>
			{{Tips Navigation
			\|uplink=[[Flood_Modeller_Tutorial_Model\| Back to Flood Modeller Tutorial Model]]
			}}

Tuflowduncan: /* TUFLOW Geometry Control File */

2025-04-10T07:20:21Z

TUFLOW Geometry Control File

← Older revision		Revision as of 17:20, 10 April 2025
Line 82:		Line 82:
	:<font color="blue"><tt>Read GIS Code BC </tt></font> <font color="red"><tt>== </tt></font> mi\2d_bc_FMT_M01_HX_001_R.MIF<font color="green"><tt> ! Deactivates the cells where the watercourse has been modelled in 1D </tt></font>		:<font color="blue"><tt>Read GIS Code BC </tt></font> <font color="red"><tt>== </tt></font> mi\2d_bc_FMT_M01_HX_001_R.MIF<font color="green"><tt> ! Deactivates the cells where the watercourse has been modelled in 1D </tt></font>

	Note that the order of the commands is important. The layer '''2d_code_FMT_M01_001.MIF''' first activates cells within the modelled area then the layer '''2d_bc_FMT_M01_HX_001_R.MIF''' deactivates selected cells along the watercourse.		Note that the order of the commands is important. The layer '''2d_code_FMT_M01_001.MIF''' first activates cells within the modelled area then the layer '''2d_bc_FMT_M01_HX_001_R.MIF''' deactivates selected cells along the watercourse.<br>
	'''Other GIS'''<br>		'''Other GIS'''<br>
	Add an extra command line after <font color="blue"><tt> Read GIS Code </tt></font><font color="red"><tt>==</tt></font>..\model\gis\2d_code_FMT_M01_001_R.shp		Add an extra command line after <font color="blue"><tt> Read GIS Code </tt></font><font color="red"><tt>==</tt></font>..\model\gis\2d_code_FMT_M01_001_R.shp

Tuflowduncan: /* TUFLOW Geometry Control File */

2025-04-10T07:19:57Z

TUFLOW Geometry Control File

← Older revision		Revision as of 17:19, 10 April 2025
Line 82:		Line 82:
	:<font color="blue"><tt>Read GIS Code BC </tt></font> <font color="red"><tt>== </tt></font> mi\2d_bc_FMT_M01_HX_001_R.MIF<font color="green"><tt> ! Deactivates the cells where the watercourse has been modelled in 1D </tt></font>		:<font color="blue"><tt>Read GIS Code BC </tt></font> <font color="red"><tt>== </tt></font> mi\2d_bc_FMT_M01_HX_001_R.MIF<font color="green"><tt> ! Deactivates the cells where the watercourse has been modelled in 1D </tt></font>

	Note that the order of the commands is important. The layer '''2d_code_FMT_M01_001.MIF''' first activates cells within the modelled area then the layer '''2d_bc_FMT_M01_HX_001_R.MIF''' deactivates selected cells along the watercourse.		Note that the order of the commands is important. The layer '''2d_code_FMT_M01_001.MIF''' first activates cells within the modelled area then the layer '''2d_bc_FMT_M01_HX_001_R.MIF''' deactivates selected cells along the watercourse.

	'''Other GIS'''<br>		'''Other GIS'''<br>
	Add an extra command line after <font color="blue"><tt> Read GIS Code </tt></font><font color="red"><tt>==</tt></font>..\model\gis\2d_code_FMT_M01_001_R.shp		Add an extra command line after <font color="blue"><tt> Read GIS Code </tt></font><font color="red"><tt>==</tt></font>..\model\gis\2d_code_FMT_M01_001_R.shp

Emilie Nielsen: /* TUFLOW HPC */

2025-02-20T06:31:18Z

TUFLOW HPC

← Older revision		Revision as of 16:31, 20 February 2025
Line 262:		Line 262:
	</ol>		</ol>
	<br>		<br>
	If you experience an issue that is not detailed above please send an email to support@tuflow.com<br>		If you experience an issue that is not detailed above please send an email to [mailto:support@tuflow.com support@tuflow.com]<br>

Pavlina Monhartova at 02:59, 17 January 2025

2025-01-17T02:59:24Z

← Older revision		Revision as of 12:59, 17 January 2025
Line 11:		Line 11:
	In the [[Tutorial_Module01_Archive#Advanced_-_Model_Resolution_.28Optional.29 \| optional section of Module 1 of the TUFLOW Tutorial Model]], we looked at reducing the cell size to get a better representation of the channel. In this module we will adopt the second approach of modelling the creek as 1D elements using Flood Modeller.<br>		In the [[Tutorial_Module01_Archive#Advanced_-_Model_Resolution_.28Optional.29 \| optional section of Module 1 of the TUFLOW Tutorial Model]], we looked at reducing the cell size to get a better representation of the channel. In this module we will adopt the second approach of modelling the creek as 1D elements using Flood Modeller.<br>

	TUFLOW may be dynamically linked to 1D networks using the hydrodynamic solutions of ESTRY (TUFLOW 1D), Flood Modeller ~~(previously ISIS)~~, XP-SWMM and 12D Solutions’ Dynamic Drainage.<br>		TUFLOW may be dynamically linked to 1D networks using the hydrodynamic solutions of ESTRY (TUFLOW 1D), Flood Modeller, XP-SWMM and 12D Solutions’ Dynamic Drainage.<br>

	Setting up a 1D/2D model where the 1D channel cuts through the 2D domain is probably the most time-consuming type of a model to setup. However, the reduction in simulation time can be beneficial and make this a good approach. For this module, the complete Flood Modeller 1D model has been provided, to allow for progressing through the module in a relatively short period of time.<br>		Setting up a 1D/2D model where the 1D channel cuts through the 2D domain is probably the most time-consuming type of a model to setup. However, the reduction in simulation time can be beneficial and make this a good approach. For this module, the complete Flood Modeller 1D model has been provided, to allow for progressing through the module in a relatively short period of time.<br>

Emilie Nielsen at 05:24, 19 July 2024

2024-07-19T05:24:29Z

← Older revision		Revision as of 15:24, 19 July 2024
Line 34:		Line 34:
	*<b>IEF</b>: A blank folder in which to store Flood Modeller Event Files used to simulate the model.		*<b>IEF</b>: A blank folder in which to store Flood Modeller Event Files used to simulate the model.
	*<b>RES</b>: A blank folder in which to write the Flood Modeller result files.		*<b>RES</b>: A blank folder in which to write the Flood Modeller result files.
	For further information on each file type, please refer to the [https://help.floodmodeller.com/~~floodmodeller/~~ Flood Modeller User Manual].<br>		For further information on each file type, please refer to the [https://help.floodmodeller.com/docs Flood Modeller User Manual].<br>
	For this tutorial, the floodplain of the study area will be modelled entirely in TUFLOW.		For this tutorial, the floodplain of the study area will be modelled entirely in TUFLOW.
	The cross-sections in the Flood Modeller 1D model have been trimmed to the top of bank to ensure there is no double-counting of storage within the floodplain.		The cross-sections in the Flood Modeller 1D model have been trimmed to the top of bank to ensure there is no double-counting of storage within the floodplain.
Line 216:		Line 216:
	<br>		<br>
	In the <b>Complete_Model\FMT_M01\Flood_Modeller\IEF</b> folder a batch file has been provided. To use the batch file in this tutorial:<br>		In the <b>Complete_Model\FMT_M01\Flood_Modeller\IEF</b> folder a batch file has been provided. To use the batch file in this tutorial:<br>
	*Ensure that you [https://wiki.tuflow.com/~~index.php?title=~~Running_linked_Flood_Modeller_-_TUFLOW_Models~~#Batch_File~~ set up the installation folders].		*Ensure that you [https://wiki.tuflow.com/Running_linked_Flood_Modeller_-_TUFLOW_Models set up the installation folders].
	*Move the batch file to the <b>FMT_Tutorial\FMT_M01\Flood_Modeller\IEF</b> folder		*Move the batch file to the <b>FMT_Tutorial\FMT_M01\Flood_Modeller\IEF</b> folder
	*Open the batch file in a text editor. On the 'set FloodModeller=' line, change the path from the one provided to the full path to the ISISf32.exe file that you set up with the installation folders.		*Open the batch file in a text editor. On the 'set FloodModeller=' line, change the path from the one provided to the full path to the ISISf32.exe file that you set up with the installation folders.

Emilie Nielsen at 00:00, 18 July 2024

2024-07-18T00:00:17Z

← Older revision		Revision as of 10:00, 18 July 2024
Line 34:		Line 34:
	*<b>IEF</b>: A blank folder in which to store Flood Modeller Event Files used to simulate the model.		*<b>IEF</b>: A blank folder in which to store Flood Modeller Event Files used to simulate the model.
	*<b>RES</b>: A blank folder in which to write the Flood Modeller result files.		*<b>RES</b>: A blank folder in which to write the Flood Modeller result files.
	For further information on each file type, please refer to the [~~http~~://help.floodmodeller.com/floodmodeller/ Flood Modeller User Manual].<br>		For further information on each file type, please refer to the [https://help.floodmodeller.com/floodmodeller/ Flood Modeller User Manual].<br>
	For this tutorial, the floodplain of the study area will be modelled entirely in TUFLOW.		For this tutorial, the floodplain of the study area will be modelled entirely in TUFLOW.
	The cross-sections in the Flood Modeller 1D model have been trimmed to the top of bank to ensure there is no double-counting of storage within the floodplain.		The cross-sections in the Flood Modeller 1D model have been trimmed to the top of bank to ensure there is no double-counting of storage within the floodplain.