Integrity Tool - Continuity Tool - Revision history

Ellis Symons at 13:47, 8 April 2022

2022-04-08T13:47:59Z

← Older revision		Revision as of 23:47, 8 April 2022
Line 1:		Line 1:
	The [[1D_Integrity_Tool_-_Continuity\|Continuity]] 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the [[Integrity_Tool_-_Flow_Trace_Tool\|Flow Trace]] check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.		The '''<u>[[1D_Integrity_Tool_-_Continuity\|Continuity]]</u>''' 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the '''<u>[[Integrity_Tool_-_Flow_Trace_Tool\|Flow Trace]]</u>''' check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.
	<ol>		<ol>
	<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the '''Continuity''' tab.		<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the '''Continuity''' tab.
Line 14:		Line 14:
	</ol>		</ol>

	Please return to the [[1D_Integrity_Tool_-_Tutorial#Using_the_1D_Integrity_Tool\|1D Integrity tutorial page]] to continue the tutorial.		Please return to the '''<u>[[1D_Integrity_Tool_-_Tutorial#Using_the_1D_Integrity_Tool\|1D Integrity tutorial page]]</u>''' to continue the tutorial.

Tuflowduncan at 13:27, 8 April 2022

2022-04-08T13:27:26Z

← Older revision		Revision as of 23:27, 8 April 2022
Line 1:		Line 1:
	The [[1D_Integrity_Tool_-_Continuity\|Continuity]] 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the [[Integrity_Tool_-_Flow_Trace_Tool\|Flow Trace] check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.		The [[1D_Integrity_Tool_-_Continuity\|Continuity]] 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the [[Integrity_Tool_-_Flow_Trace_Tool\|Flow Trace]] check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.
	<ol>		<ol>
	<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the '''Continuity''' tab.		<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the '''Continuity''' tab.

Tuflowduncan at 13:27, 8 April 2022

2022-04-08T13:27:09Z

← Older revision		Revision as of 23:27, 8 April 2022
Line 1:		Line 1:
	The [[1D_Integrity_Tool_-_Continuity\|Continuity]] 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the ~~above~~ Flow ~~trace~~ check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.		The [[1D_Integrity_Tool_-_Continuity\|Continuity]] 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the [[Integrity_Tool_-_Flow_Trace_Tool\|Flow Trace] check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.
	<ol>		<ol>
	<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the Continuity tab.		<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the '''Continuity''' tab.
	<li> Select all 4 check options.		<li> Select all 4 check options.
	<li> Investigate some of the output locations and you will see the flagged locations are where the there is an increase in the pipe area, probably indicating an error with the digitisation which should be checked against the incoming data sources. <br>		<li> Investigate some of the output locations and you will see the flagged locations are where the there is an increase in the pipe area, probably indicating an error with the digitisation which should be checked against the incoming data sources. <br>
Line 14:		Line 14:
	</ol>		</ol>

	Please return to the ~~1D Integrity tutorial~~ [[1D_Integrity_Tool_-_Tutorial#~~1D_Integrity_Tool~~\|page]] to continue the tutorial.		Please return to the [[1D_Integrity_Tool_-_Tutorial#Using_the_1D_Integrity_Tool\|1D Integrity tutorial page]] to continue the tutorial.

Tuflowduncan at 13:13, 8 April 2022

2022-04-08T13:13:06Z

← Older revision		Revision as of 23:13, 8 April 2022
Line 1:		Line 1:
	The ~~continuity~~ 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the above Flow trace check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.		The [[1D_Integrity_Tool_-_Continuity\|Continuity]] 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the above Flow trace check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.
	<ol>		<ol>
	<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the Continuity tab.		<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the Continuity tab.

Tuflowduncan at 13:06, 8 April 2022

2022-04-08T13:06:57Z

← Older revision		Revision as of 23:06, 8 April 2022
Line 11:		Line 11:

	The incoming/outgoing pipe angles and the invert levels all pass the relevant checks.		The incoming/outgoing pipe angles and the invert levels all pass the relevant checks.

			</ol>

			Please return to the 1D Integrity tutorial [[1D_Integrity_Tool_-_Tutorial#1D_Integrity_Tool\|page]] to continue the tutorial.

Tuflowduncan: Created page with "The continuity 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the above Flow trace check bu..."

2022-04-08T12:58:58Z

Created page with "The continuity 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the above Flow trace check bu..."

New page

The continuity 1D integrity tool will check all 1D inputs for downstream continuity based on the selected processing options. This is similar to the above Flow trace check but will undertake the assessment on the whole set of inputs rather than upstream of a selected link.
<ol>
<li> Ensure that the '''1d_nwk_MI01_Pipes_001_L_EG1_ID1_SN1_PD1''' layer is referenced in the 1D network Line Layers and select the Continuity tab.
<li> Select all 4 check options.
<li> Investigate some of the output locations and you will see the flagged locations are where the there is an increase in the pipe area, probably indicating an error with the digitisation which should be checked against the incoming data sources. <br>
[[File:Continuity flow trace.png]]<br>

There is also an area where the cover check highlights the pipe cover (i.e., the DEM elevation over the pipe invert level is below the threshold). In this instance, this is the location the pipe network outfalls to the open channel so does not require remediation.<br>

[[File:Flow trace canvas cover check.png]]<br>

The incoming/outgoing pipe angles and the invert levels all pass the relevant checks.