ElizaCollison: Created page with "
=Introduction= In this page we will use the messages layer generated by TUFLOW to locate the cause of an error. =Method=
To locate the error load the '''M02_5m_00..."

2023-01-06T04:19:57Z

Created page with "<ol> =Introduction= In this page we will use the messages layer generated by TUFLOW to locate the cause of an error. =Method= <ol><li>To locate the error load the '''M02_5m_00..."

New page

<ol>
=Introduction=
In this page we will use the messages layer generated by TUFLOW to locate the cause of an error.
=Method=
<ol><li>To locate the error load the '''M02_5m_001_messages_P.shp''' file from the '''TUFLOW\runs\log\''' folder.</li>
<li>To zoom to the location, right click on the layer in the "Layer Control" and select "Zoom To Layer". The error should be shown as per the image below.</li>
<li>To make the error easier to see, we will label the error to do this, select the label icon (highlighted in the image below). In the Labelling dialogue:<br>
* Tick the "Label This Layer" check box; and
* Set the "Field with Labels" to "Message".
[[File:Tute M02 QGIS Error 2050 01.png|frame|none]]
<br>
In the map window the location of the error message should be easy to see.
[[File:Tute M02 QGIS Error 2050 02.png|frame|none]]
<br>
<li>The message text indicates that the 1D bed has the elevation 32.75, whilst the 2D elevation is 42.75. Review of the DEM shows that the 2D elevations in the area are well above 40metres and indicates that the 1D elevation has been incorrectly provided as 32.75 as opposed to 42.75.</li>
</ol>

=Conclusion=
We have located the source of the error message, please return to the [[Tutorial_Module02_Archive#Error_2050 |module 2 page]], where we will address the issue.

M02 QGIS Error 2050 Archive - Revision history

ElizaCollison: Created page with " =Introduction= In this page we will use the messages layer generated by TUFLOW to locate the cause of an error. =Method= To locate the error load the '''M02_5m_00..."

ElizaCollison: Created page with "
=Introduction= In this page we will use the messages layer generated by TUFLOW to locate the cause of an error. =Method=
To locate the error load the '''M02_5m_00..."