TUFLOW Message 1056 - Revision history

Emilie Nielsen at 23:55, 22 September 2024

2024-09-22T23:55:45Z

← Older revision		Revision as of 09:55, 23 September 2024
Line 3:		Line 3:
	\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,		\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW ~~manual~~ for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "<font color="blue"><tt>Flow Area </tt></font><font color="red"><tt>==</tt></font>" is used, the default flow area method is effective. <br>		\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u> for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "<font color="blue"><tt>Flow Area </tt></font><font color="red"><tt>==</tt></font>" is used, the default flow area method is effective. <br>
	<br>		<br>
	'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. Only '''''one''''' of the following should be specified:<br>		'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. Only '''''one''''' of the following should be specified:<br>

Melissa.Moghanloo at 04:30, 22 December 2022

2022-12-22T04:30:05Z

← Older revision		Revision as of 14:30, 22 December 2022
Line 10:		Line 10:
	\|suggestions=Specify only '''''one''''' of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.		\|suggestions=Specify only '''''one''''' of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.


	\|prelink=[[TUFLOW_Message_1055\|Message 1055]]
	\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]		\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]
	\|nextlink=[[TUFLOW_Message_1057\|Message 1057]]
	}}		}}

Melissa.Moghanloo at 05:58, 1 July 2022

2022-07-01T05:58:57Z

← Older revision		Revision as of 15:58, 1 July 2022
Line 9:		Line 9:
	'''“N”''' for a Manning’s n value.		'''“N”''' for a Manning’s n value.
	\|suggestions=Specify only '''''one''''' of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.		\|suggestions=Specify only '''''one''''' of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.

	\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]
	\|link3=''
	\|link4=''
	\|prelink=[[TUFLOW_Message_1055\|Message 1055]]		\|prelink=[[TUFLOW_Message_1055\|Message 1055]]
	\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]		\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]

Melissa.Moghanloo at 06:22, 21 June 2022

2022-06-21T06:22:28Z

← Older revision		Revision as of 16:22, 21 June 2022
Line 3:		Line 3:
	\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,		\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective. <br>		\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "<font color="blue"><tt>Flow Area </tt></font><font color="red"><tt>==</tt></font>" is used, the default flow area method is effective. <br>
	<br>		<br>
	'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. Only '''''one''''' of the following should be specified:<br>		'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. Only '''''one''''' of the following should be specified:<br>

tuflow>Par at 05:35, 31 January 2011

2011-01-31T05:35:31Z

← Older revision		Revision as of 15:35, 31 January 2011
Line 5:		Line 5:
	\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective. <br>		\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective. <br>
	<br>		<br>
	'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. ~~The~~ '''one''' of the following should be specified:<br>		'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. Only '''''one''''' of the following should be specified:<br>
	'''“F”''' for a multiplication factor; or<br>		'''“F”''' for a multiplication factor; or<br>
	'''“N”''' for a Manning’s n value.		'''“N”''' for a Manning’s n value.
	\|suggestions=Specify only one of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.		\|suggestions=Specify only '''''one''''' of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.
	\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]		\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]
	\|link3=''		\|link3=''

tuflow>Par at 05:34, 31 January 2011

2011-01-31T05:34:27Z

← Older revision		Revision as of 15:34, 31 January 2011
Line 5:		Line 5:
	\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective. <br>		\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective. <br>
	<br>		<br>
	'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. The ''''one'''' of the following should be specified:<br>		'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. The '''one''' of the following should be specified:<br>
	'''“F”''' for a multiplication factor; or<br>		'''“F”''' for a multiplication factor; or<br>
	'''“N”''' for a Manning’s n value.		'''“N”''' for a Manning’s n value.

tuflow>Par at 05:34, 31 January 2011

2011-01-31T05:34:00Z

← Older revision		Revision as of 15:34, 31 January 2011
Line 3:		Line 3:
	\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,		\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc='''"E"''' and '''"T"''' are flow area flags (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective.		\|message_desc='''"E"''' and '''"T"''' are flow area flags for XZ type cross-sections (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective. <br>
			<br>
	\|suggestions=????
			'''"F"''' and '''"N"''' are vertical change in resistance for CS or HW type cross-sections. The ''''one'''' of the following should be specified:<br>
			'''“F”''' for a multiplication factor; or<br>
			'''“N”''' for a Manning’s n value.
			\|suggestions=Specify only one of either an "E" or a "T" for flow area flags or "F" or "N" for vertically varying resistance flags.
	\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]		\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]
	\|link3=''		\|link3=''

tuflow>Par at 04:44, 31 January 2011

2011-01-31T04:44:10Z

← Older revision		Revision as of 14:44, 31 January 2011
Line 3:		Line 3:
	\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,		\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc='''"E"''' and '''"T"''' are flow area flags (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using Flow Area is used, the ~~Default~~ is ~~Effective~~.		\|message_desc='''"E"''' and '''"T"''' are flow area flags (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using "Flow Area ==" is used, the default flow area method is effective.
	\|suggestions=????		\|suggestions=????
	\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]		\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]

tuflow>Par at 04:43, 31 January 2011

2011-01-31T04:43:32Z

← Older revision		Revision as of 14:43, 31 January 2011
Line 3:		Line 3:
	\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,		\|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,
	\|type=[[ERROR]]		\|type=[[ERROR]]
			\|message_desc='''"E"''' and '''"T"''' are flow area flags (see ecf command "Flow Area" in TUFLOW manual for more details). Specify an '''“E”''' to use effective area or a '''“T”''' to use total area when calculating the flow area. If neither is specified, the global value set using Flow Area is used, the Default is Effective.
	\|message_desc=????
	\|suggestions=????		\|suggestions=????
	\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]		\|discussion_page=* [[Talk:TUFLOW Message 1056\|Discuss Message 1056]]

tuflow>Par: Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1056 - Incompatible flags "E" and "T" specified for cross-section ",a," in ",a, |alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specif...'

2010-09-30T23:01:31Z

Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1056 - Incompatible flags "E" and "T" specified for cross-section ",a," in ",a, |alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specif...'

New page

{{TUFLOW_Message
|tuflow_message=ERROR 1056 - Incompatible flags "E" and "T" specified for cross-section ",a," in ",a,
|alt_msg=ERROR 1056 - Incompatible flags "F" and "N" specified for CS data ",a," in ",a,
|type=[[ERROR]]
|message_desc=????
|suggestions=????
|discussion_page=* [[Talk:TUFLOW Message 1056|Discuss Message 1056]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_1055|Message 1055]]
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1057|Message 1057]]
}}