TUFLOW Message 1313 - Revision history

Emilie Nielsen at 23:54, 22 September 2024

2024-09-22T23:54:39Z

← Older revision		Revision as of 09:54, 23 September 2024
Line 6:		Line 6:
	\|suggestions=Ensure manhole is snapped in valid location with 1D culverts upstream and downstream of the manhole. <br>		\|suggestions=Ensure manhole is snapped in valid location with 1D culverts upstream and downstream of the manhole. <br>
	<br>		<br>
	This warning is expected when any inlet pipe has an invert above the highest soffit of all outlet pipes. The pipe with high invert is ignored when determining manhole losses because it is essentially hydraulically disconnected. The full exit loss (if d/s controlled) or free-outflow (if not d/s controlled) is applied to the elevated inlet pipe. The exit losses of the inlet pipe and entry losses of the outlet pipe are not adjusted according to the approach/departure velocities as described in ~~Section~~ 5.7.~~6 of the~~ TUFLOW Manual.		This warning is expected when any inlet pipe has an invert above the highest soffit of all outlet pipes. The pipe with high invert is ignored when determining manhole losses because it is essentially hydraulically disconnected. The full exit loss (if d/s controlled) or free-outflow (if not d/s controlled) is applied to the elevated inlet pipe. The exit losses of the inlet pipe and entry losses of the outlet pipe are not adjusted according to the approach/departure velocities as described in the <u>[https://docs.tuflow.com/classic-hpc/manual/latest/ TUFLOW Manual]</u>.

Melissa.Moghanloo at 00:28, 23 December 2022

2022-12-23T00:28:33Z

← Older revision		Revision as of 10:28, 23 December 2022
Line 9:		Line 9:


	\|prelink=[[TUFLOW_Message_1312\|Message 1312]]
	\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]		\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]
	\|nextlink=[[TUFLOW_Message_1314\|Message 1314]]
	}}		}}

Melissa.Moghanloo at 05:37, 5 July 2022

2022-07-05T05:37:14Z

← Older revision		Revision as of 15:37, 5 July 2022
Line 8:		Line 8:
	This warning is expected when any inlet pipe has an invert above the highest soffit of all outlet pipes. The pipe with high invert is ignored when determining manhole losses because it is essentially hydraulically disconnected. The full exit loss (if d/s controlled) or free-outflow (if not d/s controlled) is applied to the elevated inlet pipe. The exit losses of the inlet pipe and entry losses of the outlet pipe are not adjusted according to the approach/departure velocities as described in Section 5.7.6 of the TUFLOW Manual.		This warning is expected when any inlet pipe has an invert above the highest soffit of all outlet pipes. The pipe with high invert is ignored when determining manhole losses because it is essentially hydraulically disconnected. The full exit loss (if d/s controlled) or free-outflow (if not d/s controlled) is applied to the elevated inlet pipe. The exit losses of the inlet pipe and entry losses of the outlet pipe are not adjusted according to the approach/departure velocities as described in Section 5.7.6 of the TUFLOW Manual.


	\|discussion_page=* [[Talk:TUFLOW Message 1313\|Discuss Message 1313]]
	\|link3=''
	\|link4=''
	\|prelink=[[TUFLOW_Message_1312\|Message 1312]]		\|prelink=[[TUFLOW_Message_1312\|Message 1312]]
	\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]		\|uplink=[[1xxx_TUFLOW_Messages\|1xxx Messages]]

Pavlina Monhartova at 05:52, 9 October 2019

2019-10-09T05:52:16Z

← Older revision		Revision as of 15:52, 9 October 2019
Line 6:		Line 6:
	\|suggestions=Ensure manhole is snapped in valid location with 1D culverts upstream and downstream of the manhole. <br>		\|suggestions=Ensure manhole is snapped in valid location with 1D culverts upstream and downstream of the manhole. <br>
	<br>		<br>
	This warning is expected when any inlet pipe has an invert above the highest soffit of all ~~output~~ pipes. The pipe with high invert is ignored when determining manhole losses because it is essentially hydraulically disconnected. The full exit loss (if d/s controlled) or free-outflow (if not d/s controlled) is applied to the elevated inlet pipe.		This warning is expected when any inlet pipe has an invert above the highest soffit of all outlet pipes. The pipe with high invert is ignored when determining manhole losses because it is essentially hydraulically disconnected. The full exit loss (if d/s controlled) or free-outflow (if not d/s controlled) is applied to the elevated inlet pipe. The exit losses of the inlet pipe and entry losses of the outlet pipe are not adjusted according to the approach/departure velocities as described in Section 5.7.6 of the TUFLOW Manual.

	\|discussion_page=* [[Talk:TUFLOW Message 1313\|Discuss Message 1313]]		\|discussion_page=* [[Talk:TUFLOW Message 1313\|Discuss Message 1313]]
	\|link3=''		\|link3=''

Pavlina Monhartova at 06:52, 8 October 2019

2019-10-08T06:52:36Z

← Older revision		Revision as of 16:52, 8 October 2019
Line 4:		Line 4:
	\|type=[[WARNING]]		\|type=[[WARNING]]
	\|message_desc=1D manhole object is not snapped to a inlet or outlet culvert. Manhole not being used.		\|message_desc=1D manhole object is not snapped to a inlet or outlet culvert. Manhole not being used.
	\|suggestions=Ensure manhole is snapped in valid location with 1D culverts upstream and downstream of the manhole.		\|suggestions=Ensure manhole is snapped in valid location with 1D culverts upstream and downstream of the manhole. <br>
			<br>
			This warning is expected when any inlet pipe has an invert above the highest soffit of all output pipes. The pipe with high invert is ignored when determining manhole losses because it is essentially hydraulically disconnected. The full exit loss (if d/s controlled) or free-outflow (if not d/s controlled) is applied to the elevated inlet pipe.
	\|discussion_page=* [[Talk:TUFLOW Message 1313\|Discuss Message 1313]]		\|discussion_page=* [[Talk:TUFLOW Message 1313\|Discuss Message 1313]]
	\|link3=''		\|link3=''

tuflow>Par at 03:38, 3 February 2011

2011-02-03T03:38:43Z

← Older revision		Revision as of 13:38, 3 February 2011
Line 3:		Line 3:
	\|alt_msg=WARNING 1313 - No outlet culvert connected to Manhole ",a,". Manhole not used/applied.		\|alt_msg=WARNING 1313 - No outlet culvert connected to Manhole ",a,". Manhole not used/applied.
	\|type=[[WARNING]]		\|type=[[WARNING]]
			\|message_desc=1D manhole object is not snapped to a inlet or outlet culvert. Manhole not being used.
	\|message_desc=????
			\|suggestions=Ensure manhole is snapped in valid location with 1D culverts upstream and downstream of the manhole.
	\|suggestions=????
	\|discussion_page=* [[Talk:TUFLOW Message 1313\|Discuss Message 1313]]		\|discussion_page=* [[Talk:TUFLOW Message 1313\|Discuss Message 1313]]
	\|link3=''		\|link3=''

tuflow>Par: Created page with '{{TUFLOW_Message |tuflow_message=WARNING 1313 - No inlet culvert connected to Manhole ",a,". Manhole not used/applied. |alt_msg=WARNING 1313 - No outlet culvert connected to Man...'

2010-09-30T23:30:39Z

Created page with '{{TUFLOW_Message |tuflow_message=WARNING 1313 - No inlet culvert connected to Manhole ",a,". Manhole not used/applied. |alt_msg=WARNING 1313 - No outlet culvert connected to Man...'

New page

{{TUFLOW_Message
|tuflow_message=WARNING 1313 - No inlet culvert connected to Manhole ",a,". Manhole not used/applied.
|alt_msg=WARNING 1313 - No outlet culvert connected to Manhole ",a,". Manhole not used/applied.
|type=[[WARNING]]
|message_desc=????
|suggestions=????
|discussion_page=* [[Talk:TUFLOW Message 1313|Discuss Message 1313]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_1312|Message 1312]]
|uplink=[[1xxx_TUFLOW_Messages|1xxx Messages]]
|nextlink=[[TUFLOW_Message_1314|Message 1314]]
}}