TUFLOW Message 2204 - Revision history

Pavlina Monhartova at 01:44, 5 February 2025

2025-02-05T01:44:46Z

← Older revision		Revision as of 11:44, 5 February 2025
Line 1:		Line 1:
	{{TUFLOW_Message		{{TUFLOW_Message
	\|tuflow_message=ERROR 2204 - Could not assign Flood Modeller unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.		\|tuflow_message=ERROR 2204 - Could not assign Flood Modeller unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.
			\|alt_msg=ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.
	\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=TUFLOW could not connect the HX cells to the Flood Modeller unit. This may occur if the HX line is already connected to an ESTRY 1D channel		\|message_desc=TUFLOW could not connect the HX cells to the Flood Modeller unit. This may occur if the HX line is already connected to an ESTRY 1D channel

Pavlina Monhartova at 02:48, 17 January 2025

2025-01-17T02:48:30Z

← Older revision		Revision as of 12:48, 17 January 2025
Line 1:		Line 1:
	{{TUFLOW_Message		{{TUFLOW_Message
	\|tuflow_message=ERROR 2204 - Could not assign ~~ISIS~~ unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.		\|tuflow_message=ERROR 2204 - Could not assign Flood Modeller unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.
	\|alt_msg=NA		\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=TUFLOW could not connect the HX cells to the ~~ISIS~~ unit. This may occur if the HX line is already connected to an ESTRY 1D channel		\|message_desc=TUFLOW could not connect the HX cells to the Flood Modeller unit. This may occur if the HX line is already connected to an ESTRY 1D channel
	\|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ~~ISIS~~ not directly or with an X connector.		\|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an Flood Modeller not directly or with an X connector.

Melissa.Moghanloo at 04:04, 7 February 2023

2023-02-07T04:04:49Z

← Older revision		Revision as of 14:04, 7 February 2023
Line 6:		Line 6:
	\|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.		\|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.


	\|prelink=[[TUFLOW_Message_2202\|Message 2203]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

	\|nextlink=[[TUFLOW_Message_2205\|Message 2205]]
	}}		}}

Melissa.Moghanloo at 04:22, 6 July 2022

2022-07-06T04:22:41Z

← Older revision		Revision as of 14:22, 6 July 2022
Line 5:		Line 5:
	\|message_desc=TUFLOW could not connect the HX cells to the ISIS unit. This may occur if the HX line is already connected to an ESTRY 1D channel		\|message_desc=TUFLOW could not connect the HX cells to the ISIS unit. This may occur if the HX line is already connected to an ESTRY 1D channel
	\|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.		\|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.

	\|discussion_page=* [[Talk:TUFLOW Message 2203\|Discuss Message 2203]]
	\|link3=''
	\|link4=''
	\|prelink=[[TUFLOW_Message_2202\|Message 2203]]		\|prelink=[[TUFLOW_Message_2202\|Message 2203]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

Rachel: Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node. |alt_msg=NA |type=E..."

2016-07-29T12:43:04Z

Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node. |alt_msg=NA |type=E..."

New page

{{TUFLOW_Message
|tuflow_message=ERROR 2204 - Could not assign ISIS unit node to 2D HX cell. Check that HX line is not also connected to TUFLOW 1D Node.
|alt_msg=NA
|type=[[ERROR]]
|message_desc=TUFLOW could not connect the HX cells to the ISIS unit. This may occur if the HX line is already connected to an ESTRY 1D channel
|suggestions=Check the connectivity of the HX line. Ensure that the HX is either connected to an ESTRY 1D channel with CN lines or an ISIS not directly or with an X connector.
|discussion_page=* [[Talk:TUFLOW Message 2203|Discuss Message 2203]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_2202|Message 2203]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2205|Message 2205]]
}}