TUFLOW Message 2314 - Revision history

Melissa.Moghanloo at 04:26, 7 February 2023

2023-02-07T04:26:52Z

← Older revision		Revision as of 14:26, 7 February 2023
Line 6:		Line 6:
	\|suggestions= Carry out a check to ensure a Soil ID greater than 0 has been assigned to all objects within any 2d_soil layers. Alternatively, use the Set Soil command prior to any Read GIS Soil or Read GRID Soil commands in the tgc file to ensure all cells in the 2D domain have been assigned a soil type.		\|suggestions= Carry out a check to ensure a Soil ID greater than 0 has been assigned to all objects within any 2d_soil layers. Alternatively, use the Set Soil command prior to any Read GIS Soil or Read GRID Soil commands in the tgc file to ensure all cells in the 2D domain have been assigned a soil type.

	\|prelink=[[TUFLOW_Message_2313\|Message 2313]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[TUFLOW_Message_2315\|Message 2315]]
	}}		}}

Melissa.Moghanloo at 06:25, 6 July 2022

2022-07-06T06:25:24Z

← Older revision		Revision as of 16:25, 6 July 2022
Line 5:		Line 5:
	\|message_desc= A 2D cell has been assigned a soil ID (integer) of less than one (1) or greater than 32,767. Soil IDs must be within this range. The most common reason for this is using a Soil ID value that hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.		\|message_desc= A 2D cell has been assigned a soil ID (integer) of less than one (1) or greater than 32,767. Soil IDs must be within this range. The most common reason for this is using a Soil ID value that hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.
	\|suggestions= Carry out a check to ensure a Soil ID greater than 0 has been assigned to all objects within any 2d_soil layers. Alternatively, use the Set Soil command prior to any Read GIS Soil or Read GRID Soil commands in the tgc file to ensure all cells in the 2D domain have been assigned a soil type.		\|suggestions= Carry out a check to ensure a Soil ID greater than 0 has been assigned to all objects within any 2d_soil layers. Alternatively, use the Set Soil command prior to any Read GIS Soil or Read GRID Soil commands in the tgc file to ensure all cells in the 2D domain have been assigned a soil type.

	\|discussion_page=* [[Talk:TUFLOW Message 2314\|Discuss Message 2314]]
	\|link3=''
	\|link4=''
	\|prelink=[[TUFLOW_Message_2313\|Message 2313]]		\|prelink=[[TUFLOW_Message_2313\|Message 2313]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

Par at 05:10, 15 December 2015

2015-12-15T05:10:57Z

← Older revision		Revision as of 15:10, 15 December 2015
Line 1:		Line 1:
	{{TUFLOW_Message		{{TUFLOW_Message
	\|tuflow_message=ERROR 2314 - Soil ID must be greater than 0 or less than 32767. Soil ID = 0.		\|tuflow_message=ERROR 2314 - Soil ID must be greater than 0 or less than 32767. Soil ID = 0.
	\|alt_msg=[[TUFLOW_Message_2514 \| ERROR 2314 - Could not find end of points data flag ""</Pnts>"" in XML file ('''Note - As of TUFLOW 2016 this error message is now Error 2514~~'''~~).]]		\|alt_msg=[[TUFLOW_Message_2514 \| ERROR 2314 - Could not find end of points data flag ""</Pnts>"" in XML file ('''Note'''- As of TUFLOW 2016 this error message is now Error 2514 - Could not find end of points data flag ""</Pnts>"" in XML file.).]]
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc= A 2D cell has been assigned a soil ID (integer) of less than one (1) or greater than 32,767. Soil IDs must be within this range. The most common reason for this is using a Soil ID value that hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.		\|message_desc= A 2D cell has been assigned a soil ID (integer) of less than one (1) or greater than 32,767. Soil IDs must be within this range. The most common reason for this is using a Soil ID value that hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.

Par at 04:34, 15 December 2015

2015-12-15T04:34:27Z

← Older revision		Revision as of 14:34, 15 December 2015
Line 1:		Line 1:
	{{TUFLOW_Message		{{TUFLOW_Message
	\|tuflow_message=ERROR 2314 - Soil ID must be greater than 0 or less than 32767. Soil ID = 0.		\|tuflow_message=ERROR 2314 - Soil ID must be greater than 0 or less than 32767. Soil ID = 0.
			\|alt_msg=[[TUFLOW_Message_2514 \| ERROR 2314 - Could not find end of points data flag ""</Pnts>"" in XML file ('''Note - As of TUFLOW 2016 this error message is now Error 2514''').]]
	\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc= A 2D cell has been assigned a soil ID (integer) of less than one (1) or greater than 32,767. Soil IDs must be within this range. The most common reason for this is using a Soil ID value that hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.		\|message_desc= A 2D cell has been assigned a soil ID (integer) of less than one (1) or greater than 32,767. Soil IDs must be within this range. The most common reason for this is using a Soil ID value that hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.

Par at 04:36, 29 June 2015

2015-06-29T04:36:29Z

← Older revision		Revision as of 14:36, 29 June 2015
Line 10:		Line 10:
	\|prelink=[[TUFLOW_Message_2313\|Message 2313]]		\|prelink=[[TUFLOW_Message_2313\|Message 2313]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[~~TUFLOW_Message_2317~~\|Message ~~2317~~]]		\|nextlink=[[TUFLOW_Message_2315\|Message 2315]]
	}}		}}

Steph.dufour at 06:02, 4 November 2014

2014-11-04T06:02:36Z

← Older revision		Revision as of 16:02, 4 November 2014
Line 10:		Line 10:
	\|prelink=[[TUFLOW_Message_2313\|Message 2313]]		\|prelink=[[TUFLOW_Message_2313\|Message 2313]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[~~TUFLOW_Message_2320~~\|Message ~~2320~~]]		\|nextlink=[[TUFLOW_Message_2317\|Message 2317]]
	}}		}}

Steph.dufour at 00:37, 22 October 2014

2014-10-22T00:37:30Z

← Older revision		Revision as of 10:37, 22 October 2014
Line 3:		Line 3:
	\|alt_msg=NA		\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
			\|message_desc= A 2D cell has been assigned a soil ID (integer) of less than one (1) or greater than 32,767. Soil IDs must be within this range. The most common reason for this is using a Soil ID value that hasn't been specified, in this case the MapInfo default integer of zero (0) is applied.
	\|message_desc= One or more cells within the 2D domain have been assigned a Soil ID of '0'.
	\|suggestions= Carry out a check to ensure a Soil ID greater than 0 has been assigned to all objects within any 2d_soil layers. Alternatively, use the Set Soil command prior to any Read GIS Soil or Read GRID Soil commands in the tgc file to ensure all cells in the 2D domain have been assigned a soil type.		\|suggestions= Carry out a check to ensure a Soil ID greater than 0 has been assigned to all objects within any 2d_soil layers. Alternatively, use the Set Soil command prior to any Read GIS Soil or Read GRID Soil commands in the tgc file to ensure all cells in the 2D domain have been assigned a soil type.
	\|discussion_page=* [[Talk:TUFLOW Message 2314\|Discuss Message 2314]]		\|discussion_page=* [[Talk:TUFLOW Message 2314\|Discuss Message 2314]]

Steph.dufour: Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2314 - Soil ID must be greater than 0 or less than 32767. Soil ID = 0. |alt_msg=NA |type=ERROR |message_desc= One or more cells wi..."

2014-10-22T00:21:04Z

Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2314 - Soil ID must be greater than 0 or less than 32767. Soil ID = 0. |alt_msg=NA |type=ERROR |message_desc= One or more cells wi..."

New page

{{TUFLOW_Message
|tuflow_message=ERROR 2314 - Soil ID must be greater than 0 or less than 32767. Soil ID = 0.
|alt_msg=NA
|type=[[ERROR]]
|message_desc= One or more cells within the 2D domain have been assigned a Soil ID of '0'.
|suggestions= Carry out a check to ensure a Soil ID greater than 0 has been assigned to all objects within any 2d_soil layers. Alternatively, use the Set Soil command prior to any Read GIS Soil or Read GRID Soil commands in the tgc file to ensure all cells in the 2D domain have been assigned a soil type.
|discussion_page=* [[Talk:TUFLOW Message 2314|Discuss Message 2314]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_2313|Message 2313]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2320|Message 2320]]
}}