TUFLOW Message 2334 - Revision history

Abigail.lillo at 00:57, 4 February 2025

2025-02-04T00:57:37Z

← Older revision		Revision as of 10:57, 4 February 2025
Line 1:		Line 1:
	{{TUFLOW_Message		{{TUFLOW_Message
	\|tuflow_message=ERROR 2334 - Reading ESRI Grid file or premature end of file.		\|tuflow_message=ERROR 2334 - Reading ESRI Grid file or premature end of file.
	\|alt_msg=ERROR 2334 - Exceeded limit of rainfall grids in file		\|alt_msg=ERROR 2334 - Exceeded limit of rainfall grids in file <BR>
			ERROR 2334 - Reading Grid file header information <BR>
			ERROR 2334 - Reading Grid file data. Check format and file is complete by viewing in GIS.
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:<br>		\|message_desc=This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:<br>

Abigail.lillo at 01:20, 1 February 2024

2024-02-01T01:20:50Z

← Older revision		Revision as of 11:20, 1 February 2024
Line 18:		Line 18:
	*<u>[[QGIS_Export_Raster_to_asc\|QGIS]]</u>		*<u>[[QGIS_Export_Raster_to_asc\|QGIS]]</u>
	<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>		<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>
	There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.		There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear. <br>

			<u>Error 2334 - Reading Grid file header information</u><br>
			Ensure the NODATA_value is set to -9999.

	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

Melissa.Moghanloo at 04:36, 7 February 2023

2023-02-07T04:36:41Z

← Older revision		Revision as of 14:36, 7 February 2023
Line 20:		Line 20:
	There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.		There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.

	\|prelink=[[TUFLOW_Message_2333\|Message 2333]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[TUFLOW_Message_2335\|Message 2335]]
	}}		}}

Melissa.Moghanloo at 06:13, 6 July 2022

2022-07-06T06:13:22Z

← Older revision		Revision as of 16:13, 6 July 2022
Line 19:		Line 19:
	<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>		<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>
	There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.		There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.

	\|discussion_page=* [[Talk:TUFLOW Message 2334\|Discuss Message 2334]]
	\|link3=''
	\|link4=''
	\|prelink=[[TUFLOW_Message_2333\|Message 2333]]		\|prelink=[[TUFLOW_Message_2333\|Message 2333]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

Melissa.Moghanloo at 00:48, 4 July 2022

2022-07-04T00:48:58Z

← Older revision		Revision as of 10:48, 4 July 2022
Line 14:		Line 14:

	\|suggestions=<u>Error 2334 - Reading ESRI Grid file or premature end of file</u><br>Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:<br>		\|suggestions=<u>Error 2334 - Reading ESRI Grid file or premature end of file</u><br>Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:<br>
	*[[VM_Export_to_ASC\| MapInfo with Vertical Mapper]]		*<u>[[VM_Export_to_ASC\| MapInfo with Vertical Mapper]]</u>
	*[[Arc_Export_Raster_to_asc\|ArcMap]]		*<u>[[Arc_Export_Raster_to_asc\|ArcMap]]</u>
	*[[QGIS_Export_Raster_to_asc\|QGIS]]		*<u>[[QGIS_Export_Raster_to_asc\|QGIS]]</u>
	<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>		<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>
	There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.		There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.

Rohan.king at 16:35, 10 July 2015

2015-07-10T16:35:24Z

← Older revision		Revision as of 02:35, 11 July 2015
Line 24:		Line 24:
	\|prelink=[[TUFLOW_Message_2333\|Message 2333]]		\|prelink=[[TUFLOW_Message_2333\|Message 2333]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[~~TUFLOW_Message_2348~~\|Message 2335]]		\|nextlink=[[TUFLOW_Message_2335\|Message 2335]]
	}}		}}

Rohan.king at 12:08, 8 July 2015

2015-07-08T12:08:33Z

← Older revision		Revision as of 22:08, 8 July 2015
Line 24:		Line 24:
	\|prelink=[[TUFLOW_Message_2333\|Message 2333]]		\|prelink=[[TUFLOW_Message_2333\|Message 2333]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[TUFLOW_Message_2348\|Message ~~2348~~]]		\|nextlink=[[TUFLOW_Message_2348\|Message 2335]]
	}}		}}

Rohan.king at 11:57, 8 July 2015

2015-07-08T11:57:28Z

← Older revision		Revision as of 21:57, 8 July 2015
Line 1:		Line 1:
	{{TUFLOW_Message		{{TUFLOW_Message
	\|tuflow_message=ERROR 2334 - Reading ESRI Grid file or premature end of file.		\|tuflow_message=ERROR 2334 - Reading ESRI Grid file or premature end of file.
			\|alt_msg=ERROR 2334 - Exceeded limit of rainfall grids in file
	\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:<br>		\|message_desc=This indicates that the ESRI ascii grid file does not contain a valid grid, or the file is incomplete. This file format (usually has the extension .asc or .txt) and is a plain text file (not binary) and can be opened in a text editor. At the top of the file, information on the size of the grid, the cell size and coordinates should be displayed. An example is below:<br>
Line 13:		Line 13:
	After the header information should follow the ncols x nrows of data. If the file is not in a similar format to the above, the file is most likely not in the correct format.		After the header information should follow the ncols x nrows of data. If the file is not in a similar format to the above, the file is most likely not in the correct format.

	\|suggestions=Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:<br>		\|suggestions=<u>Error 2334 - Reading ESRI Grid file or premature end of file</u><br>Open the file in a text editor to ensure that the file is in the correct format. If not, this may need to be re-exported from your GIS package. Instructions for doing so in command GIS packages are below:<br>
	*[[VM_Export_to_ASC\| MapInfo with Vertical Mapper]]		*[[VM_Export_to_ASC\| MapInfo with Vertical Mapper]]
	*[[Arc_Export_Raster_to_asc\|ArcMap]]		*[[Arc_Export_Raster_to_asc\|ArcMap]]
	*[[QGIS_Export_Raster_to_asc\|QGIS]]		*[[QGIS_Export_Raster_to_asc\|QGIS]]
			<u>Error 2334 - Exceeded limit of rainfall grids in file</u><br>
			There is a limit of 1000 rainfall grid entries in your bc_dbase. If you have more than 1000 this error will appear.
	\|discussion_page=* [[Talk:TUFLOW Message 2334\|Discuss Message 2334]]		\|discussion_page=* [[Talk:TUFLOW Message 2334\|Discuss Message 2334]]
	\|link3=''		\|link3=''

Par at 05:47, 19 May 2015

2015-05-19T05:47:41Z

@@ Line 3: / Line 3: @@
 |alt_msg=NA
 |type=[[ERROR]]
 |link3=''
 |link4=''

Steph.dufour at 05:51, 17 February 2015

2015-02-17T05:51:41Z

← Older revision		Revision as of 15:51, 17 February 2015
Line 10:		Line 10:
	\|prelink=[[TUFLOW_Message_2333\|Message 2333]]		\|prelink=[[TUFLOW_Message_2333\|Message 2333]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[~~TUFLOW_Message_2350~~\|Message ~~2350~~]]		\|nextlink=[[TUFLOW_Message_2348\|Message 2348]]
	}}		}}