TUFLOW Message 2340 - Revision history

Melissa.Moghanloo at 05:09, 7 February 2023

2023-02-07T05:09:18Z

← Older revision		Revision as of 15:09, 7 February 2023
Line 9:		Line 9:
	Check that other type of layer, such as 2d_sa isn't read with the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> command.		Check that other type of layer, such as 2d_sa isn't read with the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> command.

	\|prelink=[[TUFLOW_Message_2336\|Message 2336]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[TUFLOW_Message_2343\|Message 2343]]
	}}		}}

Melissa.Moghanloo at 06:12, 6 July 2022

2022-07-06T06:12:43Z

← Older revision		Revision as of 16:12, 6 July 2022
Line 8:		Line 8:
	\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<br>		\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<br>
	Check that other type of layer, such as 2d_sa isn't read with the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> command.		Check that other type of layer, such as 2d_sa isn't read with the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> command.

	\|discussion_page=* [[Talk:TUFLOW Message 2340\|Discuss Message 2340]]
	\|link3=''
	\|link4=''
	\|prelink=[[TUFLOW_Message_2336\|Message 2336]]		\|prelink=[[TUFLOW_Message_2336\|Message 2336]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

Melissa.Moghanloo at 00:49, 4 July 2022

2022-07-04T00:49:25Z

← Older revision		Revision as of 10:49, 4 July 2022
Line 5:		Line 5:
	\|message_desc=The file being read into the 2D model (.tbc file) using the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> does not appear to be a 2d_bc format file. This has less than the required 8 attributes for this layer.<br>		\|message_desc=The file being read into the 2D model (.tbc file) using the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> does not appear to be a 2d_bc format file. This has less than the required 8 attributes for this layer.<br>
	The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>		The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>
	Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 \| ERROR 2056]] to occur.		Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an <u>[[TUFLOW_Message_2056 \| ERROR 2056]]</u> to occur.
	\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<br>		\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<br>
	Check that other type of layer, such as 2d_sa isn't read with the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> command.		Check that other type of layer, such as 2d_sa isn't read with the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> command.

Melissa.Moghanloo at 02:50, 27 June 2022

2022-06-27T02:50:14Z

← Older revision		Revision as of 12:50, 27 June 2022
Line 3:		Line 3:
	\|alt_msg=NA		\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=The file being read into the 2D model (.tbc file) using the <tt>Read GIS BC == </tt> does not appear to be a 2d_bc format file. This has less than the required 8 attributes for this layer.<br>		\|message_desc=The file being read into the 2D model (.tbc file) using the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> does not appear to be a 2d_bc format file. This has less than the required 8 attributes for this layer.<br>
	The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>		The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>
	Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 \| ERROR 2056]] to occur.		Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 \| ERROR 2056]] to occur.
	\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<br>		\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<br>
	Check that other type of layer, such as 2d_sa isn't read with the <tt>Read GIS BC == </tt> command.		Check that other type of layer, such as 2d_sa isn't read with the <tt><font color="blue">Read GIS BC </font><font color="red">== </font></tt> command.
	\|discussion_page=* [[Talk:TUFLOW Message 2340\|Discuss Message 2340]]		\|discussion_page=* [[Talk:TUFLOW Message 2340\|Discuss Message 2340]]
	\|link3=''		\|link3=''

Pavlina Monhartova at 04:00, 8 April 2021

2021-04-08T04:00:05Z

← Older revision		Revision as of 14:00, 8 April 2021
Line 6:		Line 6:
	The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>		The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>
	Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 \| ERROR 2056]] to occur.		Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 \| ERROR 2056]] to occur.
	\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<bc>		\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<br>
	Check that other type of layer, such as 2d_sa isn't read with the <tt>Read GIS BC == </tt> command.		Check that other type of layer, such as 2d_sa isn't read with the <tt>Read GIS BC == </tt> command.
	\|discussion_page=* [[Talk:TUFLOW Message 2340\|Discuss Message 2340]]		\|discussion_page=* [[Talk:TUFLOW Message 2340\|Discuss Message 2340]]

Pavlina Monhartova at 03:59, 8 April 2021

2021-04-08T03:59:50Z

← Older revision		Revision as of 13:59, 8 April 2021
Line 6:		Line 6:
	The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>		The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>
	Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 \| ERROR 2056]] to occur.		Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 \| ERROR 2056]] to occur.
	\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.		\|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.<bc>
			Check that other type of layer, such as 2d_sa isn't read with the <tt>Read GIS BC == </tt> command.
	\|discussion_page=* [[Talk:TUFLOW Message 2340\|Discuss Message 2340]]		\|discussion_page=* [[Talk:TUFLOW Message 2340\|Discuss Message 2340]]
	\|link3=''		\|link3=''

Pavlina Monhartova at 06:10, 5 October 2018

2018-10-05T06:10:31Z

← Older revision		Revision as of 16:10, 5 October 2018
Line 10:		Line 10:
	\|link3=''		\|link3=''
	\|link4=''		\|link4=''
	\|prelink=[[~~TUFLOW_Message_2391~~\|Message ~~2391~~]]		\|prelink=[[TUFLOW_Message_2336\|Message 2336]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[~~TUFLOW_Message_2400~~\|Message ~~2400~~]]		\|nextlink=[[TUFLOW_Message_2343\|Message 2343]]
	}}		}}

Par: Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2340 - Less than 8 attributes for 2d_bc file: |alt_msg=NA |type=ERROR |message_desc=The file being read into the 2D model..."

2016-01-13T03:35:43Z

Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2340 - Less than 8 attributes for 2d_bc file: <filename> |alt_msg=NA |type=ERROR |message_desc=The file being read into the 2D model..."

New page

{{TUFLOW_Message
|tuflow_message=ERROR 2340 - Less than 8 attributes for 2d_bc file: <filename>
|alt_msg=NA
|type=[[ERROR]]
|message_desc=The file being read into the 2D model (.tbc file) using the <tt>Read GIS BC == </tt> does not appear to be a 2d_bc format file. This has less than the required 8 attributes for this layer.<br>
The primary reason for this to occur is that a 1d boundary layer (1d_bc) file is being read into the .tbc file and not into the 1d domain (.ecf file). If the filename contains the text '''1d_bc''' the additional output <tt>File appears to be a 1d_bc file and not a 2d_bc </tt> is also included in the output message.<br>
Prior to the 2016 version of TUFLOW the accidental reading of a 1d_bc layer into the 2D boundary control file .tbc could cause an [[TUFLOW_Message_2056 | ERROR 2056]] to occur.
|suggestions=Check that the 2d_bc file has the correct attributes and if a 1D boundary is being specified, please read this into the 1D control file (.ecf) or within a Start 1D Domain --> End 1D Domain block of commands in the .tcf.
|discussion_page=* [[Talk:TUFLOW Message 2340|Discuss Message 2340]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_2391|Message 2391]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2400|Message 2400]]
}}