TUFLOW Message 2436 - Revision history

Emilie Nielsen at 01:12, 27 August 2024

2024-08-27T01:12:48Z

← Older revision		Revision as of 11:12, 27 August 2024
Line 4:		Line 4:
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-10-AA release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.		\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-10-AA release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.
	\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>		\|suggestions=Use the latest <u>[https://www.tuflow.com/downloads/ TUFLOW release]</u>. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>
	If the above doesn't apply, please contact ~~<u>~~[mailto:support@tuflow.com support@tuflow.com]~~</u>~~.		If the above doesn't apply, please contact [mailto:support@tuflow.com support@tuflow.com].

Melissa.Moghanloo at 22:50, 2 March 2023

2023-03-02T22:50:47Z

← Older revision		Revision as of 08:50, 3 March 2023
Line 7:		Line 7:
	If the above doesn't apply, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.		If the above doesn't apply, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.


	\|prelink=[[TUFLOW_Message_2435\|Message 2435]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

	\|nextlink=[[TUFLOW_Message_2438\|Message 2438]]
	}}		}}

Melissa.Moghanloo at 05:56, 6 July 2022

2022-07-06T05:56:28Z

← Older revision		Revision as of 15:56, 6 July 2022
Line 6:		Line 6:
	\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>		\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>
	If the above doesn't apply, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.		If the above doesn't apply, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.

	\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]
	\|link3=''
	\|link4=''
	\|prelink=[[TUFLOW_Message_2435\|Message 2435]]		\|prelink=[[TUFLOW_Message_2435\|Message 2435]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]

Melissa.Moghanloo at 00:52, 4 July 2022

2022-07-04T00:52:09Z

← Older revision		Revision as of 10:52, 4 July 2022
Line 5:		Line 5:
	\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-10-AA release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.		\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-10-AA release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.
	\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>		\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>
	If the above doesn't apply, please contact [mailto:support@tuflow.com support@tuflow.com].		If the above doesn't apply, please contact <u>[mailto:support@tuflow.com support@tuflow.com]</u>.
	\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]		\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]
	\|link3=''		\|link3=''

Pavlina Monhartova at 05:06, 1 March 2021

2021-03-01T05:06:29Z

← Older revision		Revision as of 15:06, 1 March 2021
Line 3:		Line 3:
	\|alt_msg=NA		\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-01-AC release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.		\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-10-AA release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.
	\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>		\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>
	If the above doesn't apply, please contact [mailto:support@tuflow.com support@tuflow.com].		If the above doesn't apply, please contact [mailto:support@tuflow.com support@tuflow.com].
Line 9:		Line 9:
	\|link3=''		\|link3=''
	\|link4=''		\|link4=''
	\|prelink=[[~~TUFLOW_Message_2432~~\|Message ~~2432~~]]		\|prelink=[[TUFLOW_Message_2435\|Message 2435]]
	\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]		\|uplink=[[2xxx_TUFLOW_Messages\|2xxx Messages]]
	\|nextlink=[[TUFLOW_Message_2438\|Message 2438]]		\|nextlink=[[TUFLOW_Message_2438\|Message 2438]]

Pavlina Monhartova at 06:43, 18 September 2020

2020-09-18T06:43:13Z

← Older revision		Revision as of 16:43, 18 September 2020
Line 5:		Line 5:
	\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-01-AC release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.		\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-01-AC release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.
	\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>		\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>
	If the above doesn't apply, please contact support@tuflow.com.		If the above doesn't apply, please contact [mailto:support@tuflow.com support@tuflow.com].
	\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]		\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]
	\|link3=''		\|link3=''

Pavlina Monhartova at 06:41, 18 September 2020

2020-09-18T06:41:24Z

← Older revision		Revision as of 16:41, 18 September 2020
Line 3:		Line 3:
	\|alt_msg=NA		\|alt_msg=NA
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=Hydrographs were not accepted by the HPC solver.		\|message_desc=Hydrographs were not accepted by the HPC solver. Prior to 2020-01-AC release this error was caused by multiplication factors f1 and f2 in the 2d_rf layer other than 1.
			\|suggestions=Use the latest TUFLOW release. If multiplication factors other than 1 are used and TUFLOW version cannot be updated, multiplication should be applied to the source hydrographs rather than the factors f1 and f2.<br>
	~~\|suggestions=Please~~ contact support@tuflow.com.		If the above doesn't apply, please contact support@tuflow.com.
	\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]		\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]
	\|link3=''		\|link3=''

Pavlina Monhartova at 23:51, 15 September 2020

2020-09-15T23:51:42Z

← Older revision		Revision as of 09:51, 16 September 2020
Line 4:		Line 4:
	\|type=[[ERROR]]		\|type=[[ERROR]]
	\|message_desc=Hydrographs were not accepted by the HPC solver.		\|message_desc=Hydrographs were not accepted by the HPC solver.
	\|suggestions=Please contact support@tuflow.com		\|suggestions=Please contact support@tuflow.com.
	\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]		\|discussion_page=* [[Talk:TUFLOW Message 2436\|Discuss Message 2436]]
	\|link3=''		\|link3=''

Pavlina Monhartova: Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2436 - Sending hydrograph weights to HPC Solver. |alt_msg=NA |type=ERROR |message_desc=Hydrographs were not accepted by the HPC solv..."

2020-09-15T23:46:34Z

Created page with "{{TUFLOW_Message |tuflow_message=ERROR 2436 - Sending hydrograph weights to HPC Solver. |alt_msg=NA |type=ERROR |message_desc=Hydrographs were not accepted by the HPC solv..."

New page

{{TUFLOW_Message
|tuflow_message=ERROR 2436 - Sending hydrograph weights to HPC Solver.
|alt_msg=NA
|type=[[ERROR]]
|message_desc=Hydrographs were not accepted by the HPC solver.
|suggestions=Please contact support@tuflow.com
|discussion_page=* [[Talk:TUFLOW Message 2436|Discuss Message 2436]]
|link3=''
|link4=''
|prelink=[[TUFLOW_Message_2432|Message 2432]]
|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
|nextlink=[[TUFLOW_Message_2438|Message 2438]]
}}