Par: Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2624 - "Maximum RF Location" command is no longer used. |alt_msg=CHECK 2624 - "Maximum Hyetograph Point" command is no longer used. |type=CHECK |message_desc=Prior to the 2026 release of TUFLOW the rainfall control file (.trfc) commands `Maximum RF Location` and `Maximum Hyetograph Point` could be used to control the memory allocated for reading and processing of..."

2026-03-25T01:54:02Z

Created page with "{{TUFLOW_Message |tuflow_message=CHECK 2624 - "Maximum RF Location" command is no longer used. |alt_msg=CHECK 2624 - "Maximum Hyetograph Point" command is no longer used. |type=CHECK |message_desc=Prior to the 2026 release of TUFLOW the rainfall control file (.trfc) commands <tt>Maximum RF Location</tt> and <tt>Maximum Hyetograph Point</tt> could be used to control the memory allocated for reading and processing of..."

New page

{{TUFLOW_Message
|tuflow_message=CHECK 2624 - "Maximum RF Location" command is no longer used.
|alt_msg=CHECK 2624 - "Maximum Hyetograph Point" command is no longer used.
|type=[[CHECK ]]
|message_desc=Prior to the 2026 release of TUFLOW the rainfall control file (.trfc) commands <tt>Maximum RF Location</tt> and <tt>Maximum Hyetograph Point</tt> could be used to control the memory allocated for reading and processing of rainfalls. From the 2026 release onwards this is no longer required as the these are dynamically allocated based on the input files. 
These commands are ignored from the 2026 release onwards.
|suggestions=These commands can be removed from the .trfc if the model will not be simulated with versions of TUFLOW prior to 2026.0.

|uplink=[[2xxx_TUFLOW_Messages|2xxx Messages]]
}}

TUFLOW Message 2624 - Revision history