Emilie Nielsen: /* Conclusion */

2024-04-05T03:26:55Z

Conclusion

← Older revision		Revision as of 13:26, 5 April 2024
Line 16:		Line 16:

	=Conclusion=		=Conclusion=
	If the elevations in the SMS *.2dm file look like the above, the DEM or TIN input has been successful! Return to the <u>[[Tutorial_Module01_Archive#~~Viewing_the_Results~~ \| Tutorial Module 1]]</u> where we will view the TUFLOW results.		If the elevations in the SMS *.2dm file look like the above, the DEM or TIN input has been successful! Return to the <u>[[Tutorial_Module01_Archive#Viewing_Results \| Tutorial Module 1]]</u> where we will view the TUFLOW results.

ElizaCollison: Created page with "=Introduction= SMS can be used to view the Zpts by importing from the GIS file. However, the results directory contains a *.2dm file which contains the elevations at the cell..."

2023-01-09T02:37:36Z

Created page with "=Introduction= SMS can be used to view the Zpts by importing from the GIS file. However, the results directory contains a *.2dm file which contains the elevations at the cell..."

New page

=Introduction=
SMS can be used to view the Zpts by importing from the GIS file. However, the results directory contains a *.2dm file which contains the elevations at the cell corners (by default). This is sufficient for the purpose of checking that the DEM or TIN has been imported correctly.
=Method=
<ol>
<li>Open SMS and select ''File | Open''.</li>
<li>If you have followed the tutorial using SMS to perform all model development tasks, navigate to the '''TUFLOW\results\''' folder and select the '''M01_5m_002.2dm''' file. Otherwise, if you developed your model in ArcGIS, MapInfo, or QGIS navigate to the '''TUFLOW\results\M01\2d\''' folder and select the '''M01_5m_002.2dm''' file. </li>
<li>Once you have the 2dm (2-D Mesh) file loaded into SMS, open the Display Options Dialogue by selecting ''Display | Display Options...'' from the menu. 
''TIP: The shortcut key to bring up the Display Options dialogue is Control + D.'' 
In the Display Options dialogue, ensure that you are in the 2D Mesh module (the pane to the left). On the right, you will see a list of check boxes for making various items visible. To see just the scalar results, turn everything off, except '''Contours'''. 
[[File:SMS 10p1 Display Options.png|750px|SMS 10.1 Display Options]] 
 
<li>Select Ok. The elevations in the 2D model should now be displayed, as per the image below.</li>
''Tip: If the elevations are shown as a shaded dataset, in the Display options, navigate to the Contours tab of the 2D mesh item and ensure the Contour Method is set to "Color Fill". For more tips on SMS see the [[SMS Tips | SMS Tips page]].''
[[File:TuteM01 SMS zpt check.png|frame|none]]
</ol>

=Conclusion=
If the elevations in the SMS *.2dm file look like the above, the DEM or TIN input has been successful! Return to the [[Tutorial_Module01_Archive#Viewing_the_Results | Tutorial Module 1]] where we will view the TUFLOW results.

Tute M01 Zpt Check SMS Archive - Revision history

Emilie Nielsen: /* Conclusion */

ElizaCollison: Created page with "=Introduction= SMS can be used to view the Zpts by importing from the GIS file. However, the results directory contains a *.2dm file which contains the elevations at the cell..."