ElizaCollison: Created page with "
==Introduction== This page describes the method for using ArcGIS to create the GIS based material types (land use areas) for the proposed development. Once these layers h..."

2023-01-09T00:07:25Z

Created page with "<ol> ==Introduction== This page describes the method for using ArcGIS to create the GIS based material types (land use areas) for the proposed development. Once these layers h..."

New page

<ol>
==Introduction==
This page describes the method for using ArcGIS to create the GIS based material types (land use areas) for the proposed development. Once these layers have been setup, surface roughness or bed-resistance values (e.g. Manning’s n) are assigned to each of these land use areas via the materials.csv file created in [[Module1_test_Archive#Define_the_Materials_.28Surface_Roughness.29|Module 1]]. 

==Method==
<li>Copy the contents of the '''Module_data\Module_07\Materials''' into the '''TUFLOW\model\gis folder'''. This folder contains the following two layers: '''2d_mat_M07_DEV_001_R''' and '''2d_mat_M07_DEV_Buildings_001_R'''.
<li>Open both layers in ArcGIS. The '''2d_mat_M07_DEV_001_R''' layer contains polygons defining grassed areas and roads within the proposed development. The '''2d_mat_M07_DEV_Buildings_001_R''' layer contains polygons defining the buildings within the proposed development.
<li>The materials attribute for a number of polygons representing proposed roads in the '''2d_mat_M07_DEV_001_R''' layer have not been assigned and will need to be populated. Assign a Material ID of 2 to these polygons as shown in the figure below. Leave the remaining larger polygon with a Material ID of 1. 
 
[[File:M07 mat roads ARC.png]] 
 

All polygons within the '''2d_mat_M07_DEV_Buildings_001_R''' layer represent the buildings of the proposed development and will have the same Material ID of 3. To update the 'Material' field from 0 to 3, open the 'Calculate Field' toolset and populate the dialogue box as shown in the figure below. 
 
[[File:M07 mat update ARC.png|600px]] 
 
<li>Open the '''Materials.csv''' file created in [[Tutorial Module01_Archive|Module 1]] within the '''TUFLOW\model\''' folder to observe the Manning’s n values that will be assigned to each Material ID.

==Conclusion==
Two 2d_mat GIS layers have been created to define land use categories representing the proposed development. [[Tutorial_Module07_Archive#Define_Pipe_Network | Please return to the main page of module 7]].

</ol>

Tute M07 ARC 2D MAT Archive - Revision history

ElizaCollison: Created page with " ==Introduction== This page describes the method for using ArcGIS to create the GIS based material types (land use areas) for the proposed development. Once these layers h..."

ElizaCollison: Created page with "
==Introduction== This page describes the method for using ArcGIS to create the GIS based material types (land use areas) for the proposed development. Once these layers h..."