Tutorial M05 Check Files QGIS - Revision history

Emilie Nielsen at 23:23, 14 August 2023

2023-08-14T23:23:24Z

← Older revision		Revision as of 09:23, 15 August 2023
Line 32:		Line 32:
	:*pSlope: value of 0.5 (US_Invert - DS_Invert / length).		:*pSlope: value of 0.5 (US_Invert - DS_Invert / length).
	<br>		<br>
	~~[[File:~~Animation_M05_Check_01c.~~gif]]~~<br><br>		{{Video\|name=Animation_M05_Check_01c.mp4\|width=1280}}<br><br>
	<li>The '''pit_A_check''' file shows the pit locations and the attributes applied from the 1d_nwk pits file.<br>		<li>The '''pit_A_check''' file shows the pit locations and the attributes applied from the 1d_nwk pits file.<br>
	<br>		<br>
	~~[[File:~~Animation_M05_Check_02d.~~gif]]~~<br><br>		{{Video\|name=Animation_M05_Check_02d.mp4\|width=1280}}<br><br>
	<li>The '''1d_to_2d_check''' file shows the cells selected by the 1d_nwk pits, a single cell per pit, and the cells selected by the outlet of the pipe network (SX line). This is where the water enters the 2D domain from the 1D network. <br>		<li>The '''1d_to_2d_check''' file shows the cells selected by the 1d_nwk pits, a single cell per pit, and the cells selected by the outlet of the pipe network (SX line). This is where the water enters the 2D domain from the 1D network. <br>
	<br>		<br>
	~~[[File:~~Animation_M05_Check_03c.~~gif]]~~<br><br>		{{Video\|name=Animation_M05_Check_03c.mp4\|width=1280}}<br><br>
	<br>		<br>
	</ol>		</ol>

Emilie Nielsen at 03:52, 14 June 2023

2023-06-14T03:52:23Z

← Older revision		Revision as of 13:52, 14 June 2023
Line 32:		Line 32:
	:*pSlope: value of 0.5 (US_Invert - DS_Invert / length).		:*pSlope: value of 0.5 (US_Invert - DS_Invert / length).
	<br>		<br>
	[[File:~~Animation M05 Check 01c~~.gif]]<br><br>		[[File:Animation_M05_Check_01c.gif]]<br><br>
	<li>The '''pit_A_check''' file shows the pit locations and the attributes applied from the 1d_nwk pits file.<br>		<li>The '''pit_A_check''' file shows the pit locations and the attributes applied from the 1d_nwk pits file.<br>
	<br>		<br>
	[[File:~~Animation M05 Check 02d~~.gif]]<br><br>		[[File:Animation_M05_Check_02d.gif]]<br><br>
	<li>The '''1d_to_2d_check''' file shows the cells selected by the 1d_nwk pits, a single cell per pit, and the cells selected by the outlet of the pipe network (SX line). This is where the water enters the 2D domain from the 1D network. <br>		<li>The '''1d_to_2d_check''' file shows the cells selected by the 1d_nwk pits, a single cell per pit, and the cells selected by the outlet of the pipe network (SX line). This is where the water enters the 2D domain from the 1D network. <br>
	<br>		<br>
	[[File:~~Animation M05 Check 03c~~.gif]]<br><br>		[[File:Animation_M05_Check_03c.gif]]<br><br>
	<br>		<br>
	</ol>		</ol>

Emilie Nielsen: /* Method */

2023-06-14T02:07:40Z

Method

Emilie Nielsen: /* Method */

2023-04-19T22:49:24Z

Method

← Older revision		Revision as of 08:49, 20 April 2023
Line 5:		Line 5:
	=Method=		=Method=
	This tutorial introduces:		This tutorial introduces:
	:*[[Check_Files_2d_grd \| _grd_check_R~~.shp~~]]		:*[[Check_Files_2d_grd \| _grd_check_R]]
	:*[[Check_Files_1d_nwk_C \| _nwk_C_check_L~~.shp~~]]		:*[[Check_Files_1d_nwk_C \| _nwk_C_check_L]]
	:*[[Check_Files_1d_pit_A \| _pit_A_check_P~~.shp~~]]		:*[[Check_Files_1d_pit_A \| _pit_A_check_P]]
	:*[[Check_Files_1d_to_2d_bc \| _1d_to_2d_check_R~~.shp~~]]		:*[[Check_Files_1d_to_2d_bc \| _1d_to_2d_check_R]]

	Review the check files:		Review the check files:

ElizaCollison: Created page with "=Introduction = QGIS is used to import the check files and review the pipes and pits network connected to the 2D domain.

=Method= This tutorial introduces: :*Chec..."

2022-05-10T13:35:12Z

Created page with "=Introduction = QGIS is used to import the check files and review the pipes and pits network connected to the 2D domain. =Method= This tutorial introduces: :*Chec..."

New page

=Introduction =
QGIS is used to import the check files and review the pipes and pits network connected to the 2D domain. 
 

=Method=
This tutorial introduces:
:*[[Check_Files_2d_grd | _grd_check_R.shp]]
:*[[Check_Files_1d_nwk_C | _nwk_C_check_L.shp]]
:*[[Check_Files_1d_pit_A | _pit_A_check_P.shp]]
:*[[Check_Files_1d_to_2d_bc | _1d_to_2d_check_R.shp]]

Review the check files:
<ol>
<li>Open the following files from the ''' Module_05\TUFLOW\check''' folder:
:*'''M05_5m_001_grd_check_R.shp'''
:*'''M05_5m_001_nwk_C_check_L.shp'''
:*'''M05_5m_001_pit_A_check_P.shp'''
:*'''M05_5m_001_1d_to_2d_check_R.shp'''

<li>Use the 'Apply TUFLOW Styles to Open Layers'.
<li>The grd_check is the 2D grid defined by the 2d_code layer and contains a region object for each cell. It is useful to understand how the model is orientated, the cell size in relation to the hydraulic features and where certain calculations occur in the model. In this tutorial, the grid is orientated to align with the downstream road.
<li>The nwk_C_check file shows all attributes applied to the network elements. Some fields should be inspected as they have changes from the input 1d_nwk_M05_pipes layer:
:*Len_or_ANA: contains the length used by TUFLOW (determined by the digitised line).
:*US_Invert: set to the DS_Invert value of the pit snapped to the upstream end.
:*DS_Invert: set to the DS_Invert value of the pit snapped to the downstream end.
:*pSlope: the slope of the 1D element. 
For example, for Pipe 5:
:*Len_or_ANA: 36.52m based on the digitised line length.
:*US_Invert: set as the DS_Invert of Pit 16 as specified in the 1d_nwk_M05_pits layer.
:*DS_Invert: set as the DS_Invert of Pit 15 as specified in the 1d_nwk_M05_pits layer.
:*pSlope: value of 0.5 (US_Invert - DS_Invert / length).
 
[[File:Animation M05 Check 01c.gif]] 
<li>The pit_A_check file shows the pit locations and the attributes applied from the 1d_nwk pits file. 
 
[[File:Animation M05 Check 02d.gif]] 
<li>The 1d_to_2d_check file shows the cells selected by the 1d_nwk pits, a single cell per pit, and the cells selected by the outlet of the pipe network (SX line). This is where the water enters the 2D domain from the 1D network. 
 
[[File:Animation M05 Check 03c.gif]] 
 
</ol>

=Conclusion=
:*The grd_check file was imported to help understand the 1D/2D links location.
:*The nwk_C_check file was used to inspect the pipes attributes.
:*The pit_A_check file was used to ensure correct data were applied for the pits.
:*The 1d_to_2d_check file was used to assess the 1D/2D links at pit locations and the outlet of the pipe network to the 2D domain.
 
{{Tips Navigation
|uplink=[[Tutorial_M05#Check_Files| Back to Module 5 Main Page]]
}}

← Older revision		Revision as of 12:07, 14 June 2023
Line 20:		Line 20:

	<li>Use the 'Apply TUFLOW Styles to Open Layers'.		<li>Use the 'Apply TUFLOW Styles to Open Layers'.
	<li>The ~~grd_check~~ is the 2D grid defined by the 2d_code layer and contains a region object for each cell. It is useful to understand how the model is orientated, the cell size in relation to the hydraulic features and where certain calculations occur in the model. In this tutorial, the grid is orientated to align with the downstream road.		<li>The '''grd_check_R''' is the 2D grid defined by the 2d_code layer and contains a region object for each cell. It is useful to understand how the model is orientated, the cell size in relation to the hydraulic features and where certain calculations occur in the model. In this tutorial, the grid is orientated to align with the downstream road.
	<li>The nwk_C_check file shows all attributes applied to the network elements. Some fields should be inspected as they have changes from the input 1d_nwk_M05_pipes layer:		<li>The '''nwk_C_check''' file shows all attributes applied to the network elements. Some fields should be inspected as they have changes from the input '''1d_nwk_M05_pipes''' layer:
	:*Len_or_ANA: contains the length used by TUFLOW (determined by the digitised line).		:*Len_or_ANA: contains the length used by TUFLOW (determined by the digitised line).
	:*US_Invert: set to the DS_Invert value of the pit snapped to the upstream end.		:*US_Invert: set to the DS_Invert value of the pit snapped to the upstream end.
Line 28:		Line 28:
	For example, for Pipe 5:		For example, for Pipe 5:
	:*Len_or_ANA: 36.52m based on the digitised line length.		:*Len_or_ANA: 36.52m based on the digitised line length.
	:*US_Invert: set as the DS_Invert of Pit 16 as specified in the 1d_nwk_M05_pits layer.		:*US_Invert: set as the DS_Invert of Pit 16 as specified in the '''1d_nwk_M05_pits''' layer.
	:*DS_Invert: set as the DS_Invert of Pit 15 as specified in the 1d_nwk_M05_pits layer.		:*DS_Invert: set as the DS_Invert of Pit 15 as specified in the '''1d_nwk_M05_pits''' layer.
	:*pSlope: value of 0.5 (US_Invert - DS_Invert / length).		:*pSlope: value of 0.5 (US_Invert - DS_Invert / length).
	<br>		<br>
	[[File:Animation M05 Check 01c.gif]]<br><br>		[[File:Animation M05 Check 01c.gif]]<br><br>
	<li>The pit_A_check file shows the pit locations and the attributes applied from the 1d_nwk pits file.<br>		<li>The '''pit_A_check''' file shows the pit locations and the attributes applied from the 1d_nwk pits file.<br>
	<br>		<br>
	[[File:Animation M05 Check 02d.gif]]<br><br>		[[File:Animation M05 Check 02d.gif]]<br><br>
	<li>The 1d_to_2d_check file shows the cells selected by the 1d_nwk pits, a single cell per pit, and the cells selected by the outlet of the pipe network (SX line). This is where the water enters the 2D domain from the 1D network. <br>		<li>The '''1d_to_2d_check''' file shows the cells selected by the 1d_nwk pits, a single cell per pit, and the cells selected by the outlet of the pipe network (SX line). This is where the water enters the 2D domain from the 1D network. <br>
	<br>		<br>
	[[File:Animation M05 Check 03c.gif]]<br><br>		[[File:Animation M05 Check 03c.gif]]<br><br>

Tutorial M05 Check Files QGIS - Revision history

Emilie Nielsen at 23:23, 14 August 2023

Emilie Nielsen at 03:52, 14 June 2023

Emilie Nielsen: /* Method */

Emilie Nielsen: /* Method */

ElizaCollison: Created page with "=Introduction = QGIS is used to import the check files and review the pipes and pits network connected to the 2D domain. =Method= This tutorial introduces: :*Chec..."

ElizaCollison: Created page with "=Introduction = QGIS is used to import the check files and review the pipes and pits network connected to the 2D domain.

=Method= This tutorial introduces: :*Chec..."