Tutorial Module07 Archive - Revision history

Pavlina Monhartova at 04:41, 17 April 2025

2025-04-17T04:41:25Z

← Older revision		Revision as of 14:41, 17 April 2025
Line 345:		Line 345:
	==Results==		==Results==
	Using the methods described above in the <u>[[Tutorial_Module01_Archive#Viewing_Results \| Viewing Results]]</u> section of Module 1.		Using the methods described above in the <u>[[Tutorial_Module01_Archive#Viewing_Results \| Viewing Results]]</u> section of Module 1.
	* Check the simulation logs in the ~~DOS~~ window, .tlf and .hpc.tlf log files.		* Check the simulation logs in the console window, .tlf and .hpc.tlf log files.
	* View the results in your preferred package.		* View the results in your preferred package.
	Do the logs and results appear different to the TUFLOW Classic simulation?		Do the logs and results appear different to the TUFLOW Classic simulation?

Emilie Nielsen: /* Troubleshooting */

2025-02-20T06:29:39Z

Troubleshooting

← Older revision		Revision as of 16:29, 20 February 2025
Line 303:		Line 303:
	If the TUFLOW simulation fails to start TUFLOW will output the error in a number of locations. Firstly, check the Console Window or the TUFLOW Log File (.tlf) (located in the '''TUFLOW\runs\log\''' folder with the name '''M07_5m_DEV_001.tlf'''). This file can be opened in a text editor and the error is generally located at the end of the file. You can however search for "Error" if you cannot see the error. In most cases there is also a spatial location for the error message (if the error reported in the log file is prefixed by XY:). To check the location of the geographic errors, open the '''M07_5m_DEV_001_messages.mif''' or '''M07_5m_DEV_001_messages_P.shp''' file in your GIS package.<br>		If the TUFLOW simulation fails to start TUFLOW will output the error in a number of locations. Firstly, check the Console Window or the TUFLOW Log File (.tlf) (located in the '''TUFLOW\runs\log\''' folder with the name '''M07_5m_DEV_001.tlf'''). This file can be opened in a text editor and the error is generally located at the end of the file. You can however search for "Error" if you cannot see the error. In most cases there is also a spatial location for the error message (if the error reported in the log file is prefixed by XY:). To check the location of the geographic errors, open the '''M07_5m_DEV_001_messages.mif''' or '''M07_5m_DEV_001_messages_P.shp''' file in your GIS package.<br>
	<br>		<br>
	This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com ~~or add and describe the problem on the <u>[[Talk%3ATutorial_Module07_Archive \| discussion page~~.]~~]</u>~~<br>		This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email [mailto:support@tuflow.com support@tuflow.com].<br>

	*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]		*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]

Abigail.lillo: /* Advanced - HPC Solver (Optional) */

2024-10-10T01:37:03Z

Advanced - HPC Solver (Optional)

← Older revision		Revision as of 11:37, 10 October 2024
Line 313:		Line 313:

	= Advanced - HPC Solver (Optional) =		= Advanced - HPC Solver (Optional) =
	This section will introduce how to run the model TUFLOW’s HPC (Heavily Parallelised Compute) solver, and how to fix some common issues that may occur when trying to run a simulation using Graphics Processing Unit (GPU) hardware.		This section will introduce how to run the model TUFLOW’s HPC (Heavily Parallelised Compute) solver, and how to fix some common issues that may occur when trying to run a simulation using Graphics Processing Unit (GPU) hardware. Please see [[HPC_Features_Archive \| HPC Features Archive]] for more information on TUFLOW HPC features supported in the 2017 release.

	TUFLOW HPC can run between 10 and 100 times faster than TUFLOW Classic using NVidia Graphics Processing Units (GPU)(depending on the model configuration and hardware performance).		TUFLOW HPC can run between 10 and 100 times faster than TUFLOW Classic using NVidia Graphics Processing Units (GPU)(depending on the model configuration and hardware performance).

Emilie Nielsen: /* Run the Simulation */

2024-04-05T03:16:10Z

Run the Simulation

← Older revision		Revision as of 13:16, 5 April 2024
Line 237:		Line 237:

	=Run the Simulation=		=Run the Simulation=
	Using your preferred method for starting TUFLOW, run the newly created '''M07_5m_~s1~_001.tcf'''. Please refer to [[Tutorial_Module01_Archive#~~Running_TUFLOW~~ \| Module 1]] for a detailed description of the various methods for running a TUFLOW simulation.<br>		Using your preferred method for starting TUFLOW, run the newly created '''M07_5m_~s1~_001.tcf'''. Please refer to <u>[[Tutorial_Module01_Archive#Run_Simulation \| Module 1]]</u> for a detailed description of the various methods for running a TUFLOW simulation.<br>
	In this tutorial we are using a batch file to run simulations. The command line in our batch file will be similar to that used in Module 6:<br>		In this tutorial we are using a batch file to run simulations. The command line in our batch file will be similar to that used in Module 6:<br>
	{\| class="wikitable "		{\| class="wikitable "

ElizaCollison: /* Troubleshooting */

2023-01-09T00:43:21Z

Troubleshooting

← Older revision		Revision as of 10:43, 9 January 2023
Line 309:		Line 309:
	*[[TUFLOW_Message_2010 \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]		*[[TUFLOW_Message_2010 \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]
	*[[TUFLOW_Message_1118 \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]		*[[TUFLOW_Message_1118 \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]
	*[[~~Batch_File_Not_Running_Archive~~ \| Batch file does not run properly.]]		*[[Batch_File_Not_Running \| Batch file does not run properly.]]
	<br>		<br>

ElizaCollison: /* Troubleshooting */

2023-01-09T00:43:09Z

Troubleshooting

← Older revision		Revision as of 10:43, 9 January 2023
Line 307:		Line 307:
	*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]		*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]
	*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]		*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]
	*[[~~TUFLOW_Message_2010_Archive~~ \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]		*[[TUFLOW_Message_2010 \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]
	*[[~~TUFLOW_Message_1118_Archive~~ \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]		*[[TUFLOW_Message_1118 \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]
	*[[Batch_File_Not_Running_Archive \| Batch file does not run properly.]]		*[[Batch_File_Not_Running_Archive \| Batch file does not run properly.]]
	<br>		<br>

ElizaCollison at 00:05, 9 January 2023

2023-01-09T00:05:18Z

← Older revision		Revision as of 10:05, 9 January 2023
Line 305:		Line 305:
	This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com or add and describe the problem on the <u>[[Talk%3ATutorial_Module07_Archive \| discussion page.]]</u><br>		This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com or add and describe the problem on the <u>[[Talk%3ATutorial_Module07_Archive \| discussion page.]]</u><br>

	*[[~~Save_Date_Error~~\|Save date of .tab file is later than .mif or .mid]]		*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]
	*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]		*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]
	*[[TUFLOW_Message_2010_Archive \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]		*[[TUFLOW_Message_2010_Archive \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]

ElizaCollison at 23:49, 8 January 2023

2023-01-08T23:49:51Z

← Older revision		Revision as of 09:49, 9 January 2023
Line 1:		Line 1:
	<ol>		<ol>
	=Introduction=		=Introduction=
	In this module we will incorporate within the tutorial model a more detailed representation of the proposed development first introduced in [[Tutorial ~~Module05~~\|Module 5]]. We will be utilising a more complex method to alter the ground elevations and will also incorporate 1D elements into the model to represent the drainage network. The method of modelling a bridge demonstrated in the 'FINB2' scenario of [[Tutorial ~~Module06~~\|Module 6]] will be taken forward for this module to produce a final developed 'DEV' scenario. This will involve:		In this module we will incorporate within the tutorial model a more detailed representation of the proposed development first introduced in [[Tutorial Module05_Archive\|Module 5]]. We will be utilising a more complex method to alter the ground elevations and will also incorporate 1D elements into the model to represent the drainage network. The method of modelling a bridge demonstrated in the 'FINB2' scenario of [[Tutorial Module06_Archive\|Module 6]] will be taken forward for this module to produce a final developed 'DEV' scenario. This will involve:
	*Modification of the floodplain topography by the creation of a 3D TIN surface;		*Modification of the floodplain topography by the creation of a 3D TIN surface;
	*Revising the land use;		*Revising the land use;
Line 12:		Line 12:
	==Define Elevations (Building a TIN) ==		==Define Elevations (Building a TIN) ==
	We have provided the GIS layers necessary to modify the ground elevations to represent the proposed development. This part of the tutorial will demonstrate how a TIN is created from these GIS layers. We will also update the GIS defining the road crest level. Follow the instructions below for your preferred GIS package.		We have provided the GIS layers necessary to modify the ground elevations to represent the proposed development. This part of the tutorial will demonstrate how a TIN is created from these GIS layers. We will also update the GIS defining the road crest level. Follow the instructions below for your preferred GIS package.
	* [[~~Tute_M07_ARC_2D_TIN~~ \| ArcGIS]]		* [[Tute_M07_ARC_2D_TIN_Archive \| ArcGIS]]
	* [[~~Tute_M07_MI_2D_TIN~~ \| MapInfo]]		* [[Tute_M07_MI_2D_TIN_Archive \| MapInfo]]
	* [[~~Tute_M07_QGIS_2D_TIN~~ \| QGIS]]		* [[Tute_M07_QGIS_2D_TIN_Archive \| QGIS]]

	==Define Surface Roughness ==		==Define Surface Roughness ==
	We have provided the GIS layers necessary to modify the land use areas that will change as part of the proposed development. This part of the tutorial will require populating the layer attributes to assign Manning’s n roughness values to each land use. Follow the instructions below for your preferred GIS package.		We have provided the GIS layers necessary to modify the land use areas that will change as part of the proposed development. This part of the tutorial will require populating the layer attributes to assign Manning’s n roughness values to each land use. Follow the instructions below for your preferred GIS package.
	* [[~~Tute_M07_ARC_2D_MAT~~ \| ArcGIS]]		* [[Tute_M07_ARC_2D_MAT_Archive \| ArcGIS]]
	* [[~~Tute_M07_MI_2D_MAT~~ \| MapInfo]]		* [[Tute_M07_MI_2D_MAT_Archive \| MapInfo]]
	* [[~~Tute_M07_QGIS_2D_MAT~~ \| QGIS]]		* [[Tute_M07_QGIS_2D_MAT_Archive \| QGIS]]

	==Define Pipe Network ==		==Define Pipe Network ==
	This part of the module creates the GIS layers that make up a pipe network. The pits of the pipe network will be linked to the 2D domain. We will also create the pit inlet database which links the GIS layers to depth-discharge curves. Follow the instructions below for your preferred GIS package.		This part of the module creates the GIS layers that make up a pipe network. The pits of the pipe network will be linked to the 2D domain. We will also create the pit inlet database which links the GIS layers to depth-discharge curves. Follow the instructions below for your preferred GIS package.
	* [[~~Tute_M07_ARC_1D_NWK~~ \| ArcGIS]]		* [[Tute_M07_ARC_1D_NWK_Archive \| ArcGIS]]
	* [[~~Tute_M07_MI_1D_NWK~~ \| MapInfo]]		* [[Tute_M07_MI_1D_NWK_Archive \| MapInfo]]
	* [[~~Tute_M07_QGIS_1D_NWK~~ \| QGIS]]		* [[Tute_M07_QGIS_1D_NWK_Archive \| QGIS]]

	==Define Boundary Conditions ==		==Define Boundary Conditions ==
	This part of the module demonstrates how an inflow can be applied directly to the pits of the pipe network. A GIS layer of the inflow boundary has been provided. We will also modify the existing Boundary Conditions Database to include these new inflows. Follow the instructions below for your preferred GIS package.		This part of the module demonstrates how an inflow can be applied directly to the pits of the pipe network. A GIS layer of the inflow boundary has been provided. We will also modify the existing Boundary Conditions Database to include these new inflows. Follow the instructions below for your preferred GIS package.
	* [[~~Tute_M07_ARC_2D_SA~~ \| ArcGIS]]		* [[Tute_M07_ARC_2D_SA_Archive \| ArcGIS]]
	* [[~~Tute_M07_MI_2D_SA~~ \| MapInfo]]		* [[Tute_M07_MI_2D_SA_Archive \| MapInfo]]
	* [[~~Tute_M07_QGIS_2D_SA~~ \| QGIS]]		* [[Tute_M07_QGIS_2D_SA_Archive \| QGIS]]

	=Modify Simulation Control Files and Set-up a TUFLOW Scenario=		=Modify Simulation Control Files and Set-up a TUFLOW Scenario=
	Now that we have made all of the necessary changes to the GIS layers, we need to update our control files to include all the changes representing the proposed development. [[Tutorial ~~Module06~~\|Module 6]] introduced a scenario named ‘FIN’ which included changes to an existing structure in the model as part of the final proposed development. For this module, we will incorporate the model changes into this existing scenario.		Now that we have made all of the necessary changes to the GIS layers, we need to update our control files to include all the changes representing the proposed development. [[Tutorial Module06_Archive\|Module 6]] introduced a scenario named ‘FIN’ which included changes to an existing structure in the model as part of the final proposed development. For this module, we will incorporate the model changes into this existing scenario.

	==TGC File ==		==TGC File ==
Line 306:		Line 306:

	*[[Save_Date_Error\|Save date of .tab file is later than .mif or .mid]]		*[[Save_Date_Error\|Save date of .tab file is later than .mif or .mid]]
	*[[~~Model_Changes_Not_Seen~~ \| When reviewing check files, I can't see the changes]]		*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]
	*[[~~TUFLOW_Message_2010~~ \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]		*[[TUFLOW_Message_2010_Archive \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]
	*[[~~TUFLOW_Message_1118~~ \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]		*[[TUFLOW_Message_1118_Archive \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]
	*[[~~Batch_File_Not_Running~~ \| Batch file does not run properly.]]		*[[Batch_File_Not_Running_Archive \| Batch file does not run properly.]]
	<br>		<br>

ElizaCollison at 04:42, 6 January 2023

2023-01-06T04:42:51Z

← Older revision		Revision as of 14:42, 6 January 2023
Line 237:		Line 237:

	=Run the Simulation=		=Run the Simulation=
	Using your preferred method for starting TUFLOW, run the newly created '''M07_5m_~s1~_001.tcf'''. Please refer to [[~~Tutorial_Module01~~#Running_TUFLOW \| Module 1]] for a detailed description of the various methods for running a TUFLOW simulation.<br>		Using your preferred method for starting TUFLOW, run the newly created '''M07_5m_~s1~_001.tcf'''. Please refer to [[Tutorial_Module01_Archive#Running_TUFLOW \| Module 1]] for a detailed description of the various methods for running a TUFLOW simulation.<br>
	In this tutorial we are using a batch file to run simulations. The command line in our batch file will be similar to that used in Module 6:<br>		In this tutorial we are using a batch file to run simulations. The command line in our batch file will be similar to that used in Module 6:<br>
	{\| class="wikitable "		{\| class="wikitable "
Line 246:		Line 246:
	<tt>%RUN% <font color="red">-s1 DEV </font> M07_5m_~s1~_001.tcf</tt><br>		<tt>%RUN% <font color="red">-s1 DEV </font> M07_5m_~s1~_001.tcf</tt><br>
	\|}		\|}
	If the model fails to start correctly please refer to the <u>[[~~Tutorial_Module07~~#Troubleshooting \|troubleshooting section]]</u> at the end of this page.<br>		If the model fails to start correctly please refer to the <u>[[Tutorial_Module07_Archive#Troubleshooting \|troubleshooting section]]</u> at the end of this page.<br>

	=Review Check Files=		=Review Check Files=
Line 303:		Line 303:
	If the TUFLOW simulation fails to start TUFLOW will output the error in a number of locations. Firstly, check the Console Window or the TUFLOW Log File (.tlf) (located in the '''TUFLOW\runs\log\''' folder with the name '''M07_5m_DEV_001.tlf'''). This file can be opened in a text editor and the error is generally located at the end of the file. You can however search for "Error" if you cannot see the error. In most cases there is also a spatial location for the error message (if the error reported in the log file is prefixed by XY:). To check the location of the geographic errors, open the '''M07_5m_DEV_001_messages.mif''' or '''M07_5m_DEV_001_messages_P.shp''' file in your GIS package.<br>		If the TUFLOW simulation fails to start TUFLOW will output the error in a number of locations. Firstly, check the Console Window or the TUFLOW Log File (.tlf) (located in the '''TUFLOW\runs\log\''' folder with the name '''M07_5m_DEV_001.tlf'''). This file can be opened in a text editor and the error is generally located at the end of the file. You can however search for "Error" if you cannot see the error. In most cases there is also a spatial location for the error message (if the error reported in the log file is prefixed by XY:). To check the location of the geographic errors, open the '''M07_5m_DEV_001_messages.mif''' or '''M07_5m_DEV_001_messages_P.shp''' file in your GIS package.<br>
	<br>		<br>
	This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com or add and describe the problem on the <u>[[Talk%~~3ATutorial_Module07~~ \| discussion page.]]</u><br>		This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com or add and describe the problem on the <u>[[Talk%3ATutorial_Module07_Archive \| discussion page.]]</u><br>

	*[[Save_Date_Error\|Save date of .tab file is later than .mif or .mid]]		*[[Save_Date_Error\|Save date of .tab file is later than .mif or .mid]]
Line 318:		Line 318:

	===Model Setup===		===Model Setup===
	To switch on the HPC solver with scenario control, please see <u>[[~~Tutorial_Module05~~#Model_Setup \| HPC Model Setup]]</u> section of Module 5 (recommended).<br>		To switch on the HPC solver with scenario control, please see <u>[[Tutorial_Module05_Archive#Model_Setup \| HPC Model Setup]]</u> section of Module 5 (recommended).<br>
	To run the HPC solver using another .tcf file, simply perform the following steps:		To run the HPC solver using another .tcf file, simply perform the following steps:
	<ol>		<ol>
Line 340:		Line 340:
	</ol>		</ol>
	<br>		<br>
	''TIP: To switch on the HPC solver via scenario control commands, please see the <u>[[~~Tutorial_Module05~~#Model_Setup \| HPC Model Setup]]</u> section of Module 5 (recommended).''<br>		''TIP: To switch on the HPC solver via scenario control commands, please see the <u>[[Tutorial_Module05_Archive#Model_Setup \| HPC Model Setup]]</u> section of Module 5 (recommended).''<br>
	:''Also, to learn how to optimise a HPC simulation to achieve the fastest simulation speed please complete <u>[[~~Tutorial_Module02~~ \| Tutorial Module 2 ]]</u> and <u>[[~~Tutorial_Module03~~ \| Tutorial Module 3 ]]</u><br>''		:''Also, to learn how to optimise a HPC simulation to achieve the fastest simulation speed please complete <u>[[Tutorial_Module02_Archive \| Tutorial Module 2 ]]</u> and <u>[[Tutorial_Module03_Archive \| Tutorial Module 3 ]]</u><br>''

	==Results==		==Results==
	Using the methods described above in the <u>[[~~Tutorial_Module01~~#Viewing_Results \| Viewing Results]]</u> section of Module 1.		Using the methods described above in the <u>[[Tutorial_Module01_Archive#Viewing_Results \| Viewing Results]]</u> section of Module 1.
	* Check the simulation logs in the DOS window, .tlf and .hpc.tlf log files.		* Check the simulation logs in the DOS window, .tlf and .hpc.tlf log files.
	* View the results in your preferred package.		* View the results in your preferred package.

Pavlina Monhartova: Created page with "
=Introduction= In this module we will incorporate within the tutorial model a more detailed representation of the proposed development first introduced in Tutorial Modu..."

2022-06-02T04:07:29Z

Created page with "<ol> =Introduction= In this module we will incorporate within the tutorial model a more detailed representation of the proposed development first introduced in Tutorial Modu..."

Show changes

← Older revision		Revision as of 10:43, 9 January 2023
Line 307:		Line 307:
	*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]		*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]
	*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]		*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]
	*[[~~TUFLOW_Message_2010_Archive~~ \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]		*[[TUFLOW_Message_2010 \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]
	*[[~~TUFLOW_Message_1118_Archive~~ \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]		*[[TUFLOW_Message_1118 \| ERROR 1118 - Could not find pit inlet type ",a," in the pit inlet database]]
	*[[Batch_File_Not_Running_Archive \| Batch file does not run properly.]]		*[[Batch_File_Not_Running_Archive \| Batch file does not run properly.]]
	<br>		<br>

← Older revision		Revision as of 10:05, 9 January 2023
Line 305:		Line 305:
	This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com or add and describe the problem on the <u>[[Talk%3ATutorial_Module07_Archive \| discussion page.]]</u><br>		This section contains links to some possible problems that may occur when progressing through the fourth tutorial module. If you experience an issue that is not detailed, please email support@tuflow.com or add and describe the problem on the <u>[[Talk%3ATutorial_Module07_Archive \| discussion page.]]</u><br>

	*[[~~Save_Date_Error~~\|Save date of .tab file is later than .mif or .mid]]		*[[Save_Date_Error_Archive\|Save date of .tab file is later than .mif or .mid]]
	*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]		*[[Model_Changes_Not_Seen_Archive \| When reviewing check files, I can't see the changes]]
	*[[TUFLOW_Message_2010_Archive \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]		*[[TUFLOW_Message_2010_Archive \| ERROR 2010 - Material ID must be greater than 0 or less than 32767]]

Tutorial Module07 Archive - Revision history

Pavlina Monhartova at 04:41, 17 April 2025

Emilie Nielsen: /* Troubleshooting */

Abigail.lillo: /* Advanced - HPC Solver (Optional) */

Emilie Nielsen: /* Run the Simulation */

ElizaCollison: /* Troubleshooting */

ElizaCollison: /* Troubleshooting */

ElizaCollison at 00:05, 9 January 2023

ElizaCollison at 23:49, 8 January 2023

ElizaCollison at 04:42, 6 January 2023

Pavlina Monhartova: Created page with " =Introduction= In this module we will incorporate within the tutorial model a more detailed representation of the proposed development first introduced in Tutorial Modu..."

Pavlina Monhartova: Created page with "
=Introduction= In this module we will incorporate within the tutorial model a more detailed representation of the proposed development first introduced in Tutorial Modu..."