Difference between revisions of "TUFLOW Message 1999"
Jump to navigation
Jump to search
(Created page with "{{TUFLOW_Message |tuflow_message=ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at <time>. |alt_msg=N/A |type=ERROR |message_desc=The wate...") |
(No difference)
|
Revision as of 19:37, 11 July 2016
TUFLOW Message
ERROR 1998 - Water level of <water level> exceeds range in Channel <channel ID> at
Alternate Message
N/A
Message Type
ERROR
Description
The water level in a 1D channel has exceeded the instability water level for the channel. The default instability water level is 10 times the maximum depth in the cross-section for the channel. This can be modified with the .ecf command: "Depth Limit Factor == ". This can occur if the 1D water level fluctuates widely due to stability issues and may result in a NaN (not a number).
Suggestions
Please refer to Section 14.3 of the 2016 TUFLOW manual for tips on finding the start of an instability.
Up |
---|
1xxx Messages |