Revision as of 11:20, 9 September 2016 view source Teegan.Burke (talk \| contribs) Bureaucrats, Administrators 428 edits No edit summary ← Older edit		Revision as of 12:03, 9 September 2016 view source Bill Syme (talk \| contribs) Bureaucrats, Administrators 461 edits No edit summary Newer edit →
Line 1: {{TUFLOW_Message \|tuflow_message=CHECK 2118 - Lowered SX ZC Zpt by <change in 2C cell elevation ~~in metres~~>m to 1D node bed level. \|alt_msg=WARNING 2118 - Lowered SX ZC Zpt by <change in 2C cell elevation ~~in metres~~>m to 1D node bed level. \|type=[[CHECK]] <br> [[WARNING]] \|message_desc=Lowered SX ZC Zpt to 1D node bed level. This message only appears in the _message.mif file and is associated with a special 2D cell style (<u>wjs - in the description from the access database, there was a ??? here, was this on purpose</u>).<br> A "Z" flag has been used to adjust the ZC elevation at each cell at/along the 2D SX object to below the 1D node bed elevation where ZC is higher. The ZC elevation is set to the Cell Wet/Dry Depth below the 1D node bed. It is not recommended to use the Z flag without first checking that the reason for the discrepancy in elevations between 1D and 2D domains is appropriate.<br>

TUFLOW Message 2118: Difference between revisions