TUFLOW Message 1261: Difference between revisions
Jump to navigation
Jump to search
Content deleted Content added
No edit summary |
No edit summary |
||
| Line 3: | Line 3: | ||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[ERROR]] |
|type=[[ERROR]] |
||
|message_desc=Invalid Manning's n value assigned to channel, this will occur for a 0 or negative Manning's n value. |
|||
|message_desc=???? |
|||
|suggestions=Assign a valid Manning's n value for channel. If material values are defined in the XZ cross-section ("M" flag), the n_or_n_F attribute in the 1d_nwk is a multiplication factor and should be set to 1 (this may be adjusted as part of the calibration process). |
|||
|suggestions=???? |
|||
|discussion_page=* [[Talk:TUFLOW Message 1261|Discuss Message 1261]] |
|discussion_page=* [[Talk:TUFLOW Message 1261|Discuss Message 1261]] |
||
|link3='' |
|link3='' |
||
Revision as of 09:28, 2 February 2011
TUFLOW Message
ERROR 1261 - Invalid Manning's n value of ",a," assigned to channel
Alternate Message
NA
Message Type
ERROR
Description
Invalid Manning's n value assigned to channel, this will occur for a 0 or negative Manning's n value.
Suggestions
Assign a valid Manning's n value for channel. If material values are defined in the XZ cross-section ("M" flag), the n_or_n_F attribute in the 1d_nwk is a multiplication factor and should be set to 1 (this may be adjusted as part of the calibration process).
| Up |
|---|
 1xxx Messages
|