Flood Modeller Tutorial Module01: Difference between revisions
Content deleted Content added
Line 173:
<li> Open Flood Modeller. Select 'Load 1D Network'. Navigate to '''\FMT_Tutorial\FMT_M01\Flood_Modeller\DAT''' and load the '''FMT_M01_001.dat'''.</li>
<li> Right click 'Event Data' and select 'Add Item'. Navigate to '''\FMT_Tutorial\FMT_M01\Flood_Modeller\IED''' and load the '''FMT_Inflows.IED'''.</li>
[[file:FMT Load1Dnwk.JPG|500px]]
<li> On the 'Simulation' tab, click New 1D Simulation. Save the file when prompted in the as '''\FMT_Tutorial\FMT_M01\Flood_Modeller\IEF''' folder as'''FMT_M01_001.ief'''</li>
<li> On the 'Files' Tab of the simulation window, set the following parameters:</li>
*Event Title: FMT_M01_001
*1D Data File: The full path to the \FMT_Tutorial\FMT_M01\Flood_Modeller\DAT\FMT_M01_001.dat
*Use Initial Conditions from: Network File (.dat)
*Results File: the full path to \FMT_Tutorial\FMT_M01\Flood_Modeller\RES\FMT_M01_001
<li>To the right of the Event Data box, click Add and select the '''FMT_Indflows.IED''' file in the '''\FMT_Tutorial\FMT_M01\Flood_Modeller\IED''' folder.</li>
[[file:FMT Simulation files.JPG|500px]]
<li>On the 'Times' tab, we will replace the simulation time parameters that were removed from TUFLOW. Enter the following parameters:</li>
*Run Type: Unsteady (Fixed Timestep)
*Start Time (hrs): 0
*End Time (hrs): 3
*Timestep (s):1
*Save Interval (s): 300
[[file:FMT Simulation times.JPG|500px]]
<li> On the 'Links' tab, enter the following parameters:
*2-d Scheme: TUFLOW
*2-d Timestep: 2
*2-d control file: full path to the '''FMT_M01_001.tcf''' from the '''\FMT_Tutorial\FMT_M01\TUFLOW\runs''' folder
=Run the Simulation=
| |||