Difference between revisions of "TUFLOW Message 1041"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc=Multiple upstream or downstream channel, unable to interpolate inverts. | |message_desc=Multiple upstream or downstream channel, unable to interpolate inverts. | ||
| − | |suggestions=A useful tip at a junction of 1D channels is to use a connector (Channel_Type of “X”) for connecting a side tributary or pipe into the main flowpath. TUFLOW will then be able to interpolate inverts. | + | |suggestions=A useful tip at a junction of 1D channels is to use a connector (Channel_Type of “X”) for connecting a side tributary or pipe into the main flowpath. TUFLOW will then be able to interpolate inverts.<br> |
| + | Specify inverts upstream and downstream of the culvert, either via the US_invert / DS_invert in the 1D channel object or via snapped 1D node objects. | ||
|discussion_page=* [[Talk:TUFLOW Message 1041|Discuss Message 1041]] | |discussion_page=* [[Talk:TUFLOW Message 1041|Discuss Message 1041]] | ||
|link3='' | |link3='' | ||
Revision as of 17:27, 6 February 2011
TUFLOW Message
ERROR 1041 - Culvert branch splits downstream of channel ",a," at Node ",a,". Could not interpolate invert.
Alternate Message
ERROR 1041 - Culvert branch splits upstream of channel ",a," at Node ",a,". Could not interpolate invert.
Message Type
ERROR
Description
Multiple upstream or downstream channel, unable to interpolate inverts.
Suggestions
A useful tip at a junction of 1D channels is to use a connector (Channel_Type of “X”) for connecting a side tributary or pipe into the main flowpath. TUFLOW will then be able to interpolate inverts.
Specify inverts upstream and downstream of the culvert, either via the US_invert / DS_invert in the 1D channel object or via snapped 1D node objects.
| Up |
|---|
 1xxx Messages
|