TUFLOW Message 1037: Difference between revisions
Created page with '{{TUFLOW_Message |tuflow_message=CHECK 1037 - Channel ",a," interpolated from XS ",a," (",a,"%) and XS ",a," (",a,"%). |alt_msg=NA |type=CHECK |message_desc=???? |suggestions...' |
No edit summary |
||
| Line 1: | Line 1: | ||
{{TUFLOW_Message |
{{TUFLOW_Message |
||
|tuflow_message=CHECK 1037 - Channel |
|tuflow_message=CHECK 1037 - Channel <channel ID> interpolated from XS <cross-section 1> (<weighting for cross-section 1> as %) and XS <cross-section 2> (<weighting for cross-section 2> as %). |
||
|alt_msg=NA |
|alt_msg=NA |
||
|type=[[CHECK]] |
|type=[[CHECK]] |
||
|message_desc=A channel cross-section has not been specified, cross-sectional properties interpolated from upstream and downstream cross-sections listed. Weighting for interpolation are listed.<br> |
|||
|message_desc=???? |
|||
|suggestions=???? |
|||
Cross section interpolation can be globally turned off, forcing each channel to have a cross-section specified. This is done with the .ecf command: <font color="green"><tt>Interpolate Cross-Sections == OFF</tt></font>. |
|||
|suggestions=Check if interpolatted cross-section is desired in this location.<br> |
|||
Interpolated cross-section properties can be found in <''runfile_''1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command <font color="green"><tt>Write Check Files == <location></tt></font> |
|||
|discussion_page=* [[Talk:TUFLOW Message 1037|Discuss Message 1037]] |
|discussion_page=* [[Talk:TUFLOW Message 1037|Discuss Message 1037]] |
||
|link3='' |
|link3='' |
||
Revision as of 17:38, 6 February 2011
TUFLOW Message
CHECK 1037 - Channel <channel ID> interpolated from XS <cross-section 1> (<weighting for cross-section 1> as %) and XS <cross-section 2> (<weighting for cross-section 2> as %).
Alternate Message
NA
Message Type
CHECK
Description
A channel cross-section has not been specified, cross-sectional properties interpolated from upstream and downstream cross-sections listed. Weighting for interpolation are listed.
Cross section interpolation can be globally turned off, forcing each channel to have a cross-section specified. This is done with the .ecf command: Interpolate Cross-Sections == OFF.
Suggestions
Check if interpolatted cross-section is desired in this location.
Interpolated cross-section properties can be found in <runfile_1d_ta_tables_check.csv> which is written with the 1D check files location as specified with the .ecf command Write Check Files == <location>
| Up |
|---|
 1xxx Messages
|