Difference between revisions of "TUFLOW Message 3034"
Jump to navigation
Jump to search
Teegan.Burke (talk | contribs) |
|||
| Line 5: | Line 5: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=In HPC solver, the number of hydrograph assigned at one cell is limited to 4 due to the memory management. |
| − | |suggestions= | + | |suggestions=Reduce the number of hydrographs, e.g. 2d_sa, 2d_rf, specified at a single cell. |
|discussion_page=* [[Talk:TUFLOW Message 3034|Discuss Message 3034]] | |discussion_page=* [[Talk:TUFLOW Message 3034|Discuss Message 3034]] | ||
Revision as of 16:46, 16 July 2018
TUFLOW Message
ERROR 3034: Number of hydrograph index layers exceeded. Maximum is 4.
Alternate Message
ERROR 3034: Number of hydrograph weight layers exceeded. Maximum is 4.
Message Type
ERROR
Description
In HPC solver, the number of hydrograph assigned at one cell is limited to 4 due to the memory management.
Suggestions
Reduce the number of hydrographs, e.g. 2d_sa, 2d_rf, specified at a single cell.
| Up |
|---|
 3xxx Messages
|