Difference between revisions of "TUFLOW Message 1200"
Jump to navigation
Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels |alt_msg=NA |type=CHECK |message_des...') |
|||
Line 1: | Line 1: | ||
{{TUFLOW_Message | {{TUFLOW_Message | ||
− | |tuflow_message=CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels | + | |tuflow_message=CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels. |
|alt_msg=NA | |alt_msg=NA | ||
|type=[[CHECK]] | |type=[[CHECK]] | ||
− | |message_desc= | + | |message_desc=Node at start of connector can only be used for setting up channel inverts and pit channels. |
− | |suggestions= | + | |suggestions=Check if the use is as intentional. |
|discussion_page=* [[Talk:TUFLOW Message 1200|Discuss Message 1200]] | |discussion_page=* [[Talk:TUFLOW Message 1200|Discuss Message 1200]] | ||
|link3='' | |link3='' |
Revision as of 16:46, 6 March 2019
TUFLOW Message
CHECK 1200 - Node at start of connector can only be used for setting up channel inverts and pit channels.
Alternate Message
NA
Message Type
CHECK
Description
Node at start of connector can only be used for setting up channel inverts and pit channels.
Suggestions
Check if the use is as intentional.
Up |
---|
1xxx Messages |