Difference between revisions of "TUFLOW Message 1032"
Jump to navigation
Jump to search
(Created page with '{{TUFLOW_Message |tuflow_message=ERROR 1032 - Branch splits downstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties. |alt_msg=ERROR 1032 - Bran...') |
|||
| Line 3: | Line 3: | ||
|alt_msg=ERROR 1032 - Branch splits upstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties. | |alt_msg=ERROR 1032 - Branch splits upstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties. | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
| − | |message_desc= | + | |message_desc=Cross section properties can't be interpolated. |
| − | |suggestions= | + | |suggestions=Use a connector (X) at junctions for side branches to indicate main branch. |
|discussion_page=* [[Talk:TUFLOW Message 1032|Discuss Message 1032]] | |discussion_page=* [[Talk:TUFLOW Message 1032|Discuss Message 1032]] | ||
|link3='' | |link3='' | ||
Revision as of 18:22, 20 August 2019
TUFLOW Message
ERROR 1032 - Branch splits downstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties.
Alternate Message
ERROR 1032 - Branch splits upstream of channel ",a," at Node ",a,". Could not interpolate cross-section properties.
Message Type
ERROR
Description
Cross section properties can't be interpolated.
Suggestions
Use a connector (X) at junctions for side branches to indicate main branch.
| Up |
|---|
 1xxx Messages
|