Difference between revisions of "TUFLOW Message 2304"
Jump to navigation
Jump to search
| Line 4: | Line 4: | ||
|type=[[ERROR]] | |type=[[ERROR]] | ||
|message_desc= No 1D node was found connected to variable Z shape 1D trigger. | |message_desc= No 1D node was found connected to variable Z shape 1D trigger. | ||
| − | |suggestions= Check that the trigger location is specified in the Trigger_1 (and/or Trigger_2) attribute, and the trigger point is snapped to a 1D node or a channel end. | + | |suggestions= Check that the trigger location is specified in the Trigger_1 (and/or Trigger_2) attribute, and the trigger point is snapped to a 1D node or a channel end. Note that this functionality is currently only available in TUFLOW 1D ESTRY engine. |
|discussion_page=* [[Talk:TUFLOW Message 2304|Discuss Message 2304]] | |discussion_page=* [[Talk:TUFLOW Message 2304|Discuss Message 2304]] | ||
|link3='' | |link3='' | ||
Revision as of 14:37, 11 March 2020
TUFLOW Message
ERROR 2304 - Could not find 1D Node at Variable Z Trigger for Variable Z Shape.
Alternate Message
NA
Message Type
ERROR
Description
No 1D node was found connected to variable Z shape 1D trigger.
Suggestions
Check that the trigger location is specified in the Trigger_1 (and/or Trigger_2) attribute, and the trigger point is snapped to a 1D node or a channel end. Note that this functionality is currently only available in TUFLOW 1D ESTRY engine.
| Up |
|---|
 2xxx Messages
|